Easytop-Slanted seat valve
(free-flow valve),
with Viega-Press connections,
with SC-Contur,
valve box and top made of
gunmetal in accordance
with DIN 50930-6,
valve seat made of
stainless steel,
with spindle transmission and
position indication open/closed,
handwheel with interchangeable
medium mark green/red,
with drain plug,
working pressure: 16 bar (PN 16),
working temperature: 90 °C,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	valve nominal width (press connection)
2237	(15) 15	5	457 051
	(15) 18	5	457 068
	(20) 22	5	457 075
	(25) 28	5	457 082
	(32) 35		457 099
	(40) 42		457 105
	(50) 54		457 129

Easytop-Slanted seat valve
(Free-flow valve),
with Sanfix P-connections,
with SC-Contur,
valve box and top made of
gunmetal in accordance
with DIN 50930-6,
valve seat made of
stainless steel,
with spindle transmission and
position indication open/closed,
handwheel with interchangeable
medium mark green/red,
with drain plug,
working pressure: 16 bar (PN 16),
working temperature: 90°C,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	valve nominal width (Sanfix P-connection)
2137	(15) 16	5	595 456
	(15) 20	5	595 463
	(20) 25	5	595 470

Easytop-Slanted seat valve
(free-flow valve),
with cylindrical male thread
in accordance with ISO 228 for
flat sealing unions,
valve box and top made of
gunmetal in accordance
with DIN 50930-6,
valve seat made of
stainless steel,
with spindle transmission and
position indication open/closed,
handwheel with interchangeable
medium mark green/red,
with drain plug,
working pressure: 16 bar (PN 16),
working temperature: 90 °C,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	valve nominal width (threaded connection)
2237.1	(15) 3/4	5	457 136
	(20) 1	5	457 143
	(25) 1 1/4	5	457 150
	(32) 1 1/2		457 167
	(40) 1 3/4		457 174
	(50) 2 3/8		457 181

Easytop-Combined slanted
seat valve KRV (free-flow valve
with non-return valve),
with Viega-Press connections,
with SC-Contur,
valve box and top made of
gunmetal in accordance
with DIN 50930-6,
valve seat made of
stainless steel,
with spindle transmission and
position indication open/closed,
handwheel with interchangeable
medium mark green/red,
with test socket and drain plug,
working pressure: 16 bar (PN 16),
working temperature: 90 °C,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	valve nominal width (press connection)
2238	(15) 15	5	457 198
	(15) 18	5	457 204
	(20) 22	5	457 211
	(25) 28	5	457 228
	(32) 35		457 235
	(40) 42		457 242
	(50) 54		457 259

Easytop-Combined slanted
seat valve KRV (free-flow valve
with non-return valve),
with Sanfix P-connections,
with SC-Contur,
valve box and top made of
gunmetal in accordance
with DIN 50930-6,
valve seat made of
stainless steel,
with spindle transmission and
position indication open/closed,
handwheel with interchangeable
medium mark green/red,
with test socket and drain plug,
working pressure: 16 bar (PN 16),
working temperature: 90°C,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	valve nominal width (Sanfix P-connection)
2138	(15) 16	5	595 531
	(15) 20	5	595 548
	(20) 25	5	595 555

Easytop-Combined slanted
seat valve KRV (free-flow valve
with non-return valve),
with cylindrical male thread
in accordance with ISO 228,
for flat packed unions,
valve box and top made of
gunmetal in accordance
with DIN 50930-6,
valve seat made of
stainless steel,
with spindle transmission and
position indication open/closed,
handwheel with interchangeable
medium mark green/red,
with test socket and drain plug,
working pressure: 16 bar (PN 16),
working temperature: 90 °C,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	valve nominal width (threaded connection)
2238.1	(15) 3/4	5	457 266
	(20) 1	5	457 273
	(25) 1 1/4	5	457 280
	(32) 1 1/2		457 303
	(40) 1 3/4		457 310
	(50) 2 3/8		457 327

Easytop-Non return valve,
with Viega-Press connections,
with SC-Contur,
valve box and top made of
gunmetal in accordance
with DIN 50930-6,
valve seat made of
stainless steel,
with test socket and drain plug,
working pressure: 16 bar (PN 16),
working temperature: 90 °C,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	valve nominal width (press connection)
2239	(15) 15	5	471 019
	(15) 18	5	471 026
	(20) 22	5	471 033
	(25) 28	5	471 040
	(32) 35		471 156
	(40) 42		471 163
	(50) 54		471 170

Easytop-Non return valve,
with cylindrical male thread
in accordance with ISO 228,
for flat packed unions,
valve box and top made of
gunmetal in accordance
with DIN 50930-6,
valve seat made of
stainless steel,
with test socket and drain plug,
working pressure: 16 bar (PN 16),
working temperature: 90 °C,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	valve nominal width (threaded connection)
2239.1	(15) 3/4	5	471 187
	(20) 1	5	471 194
	(25) 1 1/4	5	471 200
	(32) 1 1/2		471 217
	(40) 1 3/4		471 224
	(50) 2 3/8		471 231

Easytop XL-Slanted seat valve
(free flow valve),
with flange connection in accordance with DIN 2501,
valve box and top made of
gunmetal in accordance with DIN 50930-6,
valve seat made of stainless steel,
with spindle transmission and
position indication open/closed,
handwheel with interchangeable
medium mark green/red,
with drain plug,
working pressure: 16 bar (PN 16),
working temperature: 90 °C,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	flange connection
2237XL	50		624 323
	65		624 330
	80		624 347
	100		624 354

Easytop XL-Non return valve,
with flange connection in accordance with DIN 2501,
valve box and top made of
gunmetal in accordance with DIN 50930-6,
valve seat made of stainless steel,
with test socket and drain plug,
working pressure: 16 bar (PN16),
working temperature: 90°C,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	flange connection
2239XL	50		624 408
	65		624 415

Hinweis:
Lieferbar ab Mai 2010!

Drain valve,
made of gunmetal,
with handwheel and lateral outlet,
suitable for Easytop slanted seat valve,

model	order details	packing unit	order code
	threaded connection
2234	1/4	5	457 334
	3/8		640 989

Easytop-Drain valve elongation,
gunmetal,
for usage of drain valve
and insulating shell,

model	order details	packing unit	order code
	threaded connection x length
2234.5	1/4 x 50		553 654

Insulating shell,
suitable for Easytop Inox- and Easytop-
Slanted seat valve,
insulating thickness according to EnEV,
self-locking,

model	order details	packing unit	order code
	for valve nominal width
2210.10	15		488 550
	20		488 567
	25		488 574
	32		488 161
	40		488 178
	50		488 185

Easytop Inox-Slanted seat valve
(Free-flow valve),
with Viega-Press connections,
with SC-Contur,
made of stainless steel,
with spindle transmission and
position indication open/closed,
handwheel with interchangeable
medium mark green/red,
with drain plug,
working pressure: 16 bar (PN 16)
working temperature: 90 °C,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	valve nominal width (press connection)
2337	(15) 15	5	468 392
	(15) 18	5	468 408
	(20) 22	5	468 415
	(25) 28	5	468 422
	(32) 35		468 439
	(40) 42		468 446
	(50) 54		468 453

Easytop Inox-Combined slanted
seat valve KRV (free-flow valve
with non-return valve),
with Viega-Press connections,
with SC-Contur,
made of stainless steel,
with spindle transmission and
position indication open/closed,
handwheel with interchangeable
medium mark green/red,
with test socket and drain plug,
working pressure: 16 bar (PN 16)
working temperature: 90 °C,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	valve nominal width (press connection)
2338	(15) 15	5	468 460
	(15) 18	5	468 477
	(20) 22	5	468 484
	(25) 28	5	468 491
	(32) 35		468 507
	(40) 42		468 514
	(50) 54		468 521

Easytop Inox-Non return valve,
with Viega-Press connections,
with SC-Contur,
made of stainless steel,
with test socket and drain plug,
working pressure: 16 bar (PN 16),
working temperature: 90 °C,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	valve nominal width (press connection)
2339	(15) 15	5	471 255
	(15) 18	5	471 262
	(20) 22	5	471 279
	(25) 28	5	471 286
	(32) 35		471 293
	(40) 42		471 309
	(50) 54		471 316

Drain valve,
made of stainless steel,
with handwheel and lateral outlet,
suitable for Easytop Inox-Slanted seat valve,

model	order details	packing unit	order code
	threaded connection
2334	1/4	5	471 569

Easytop Inox-Drain valve elongation,
stainless steel,
for use of drain valve
and insulating shell,

model	order details	packing unit	order code
	threaded connection x length
2334.5	1/4 x 50		553 661

Insulating shell,
suitable for Easytop Inox- and Easytop-
Slanted seat valve,
insulating thickness according to EnEV,
self-locking,

model	order details	packing unit	order code
	for valve nominal width
2210.10	15		488 550
	20		488 567
	25		488 574
	32		488 161
	40		488 178
	50		488 185

Easytop-Slanted seat valve Basic
(free-flow valve),
with Viega-Press connections,
with SC-Contur,
valve box made of gunmetal,
in accordance with DIN 50930-6,
top made of brass,
with spindle transmission and
position indication open/closed,
with drain plug,
working pressure: 16 bar (PN 16),
working temperature: 90 °C,
with DIN-DVGW-test ark,

model	order details	packing unit	order code
	valve nominal width (press connection)
2237.09	(15) 15	5	623 326
	(15) 18	5	623 333
	(20) 22	5	623 340
	(25) 28	5	623 951
	(32) 35		623 968
	(40) 42		623 975
	(50) 54		623 982

Easytop-Slanted seat valve Basic
(free-flow valve),
with cylindrical male thread
in accordance with ISO 228
for flat sealing unions,
valve box made of gunmetal
in accordance with DIN 50930-6,
top made of brass,
with spindle transmission and
position indication open/closed,
with drain plug,
working pressure: 16 bar (PN 16),
working temperature: 90 °C,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	valve nominal width (thread connection)
2237.19	(15) 3/4	5	624 200
	(20) 1	5	624 217
	(25) 1 1/4	5	624 224
	(32) 1 1/2		624 231
	(40) 1 3/4		624 248
	(50) 2 3/8		624 255

Easytop-Combined slanted
seat valve KRV Basic
(free-flow valve with non-return valve),
with Viega-Press connections,
with SC-Contur,
valve box made of gunmetal
in accordance with DIN 50930-6,
top made of brass,
with spindle transmission and
position indication open/closed,
with test socket and drain plug,
working pressure: 16 bar (PN 16),
working temperature: 90 °C,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	valve nominal width (press connection)
2238.09	(15) 15	5	623 999
	(15) 18	5	624 002
	(20) 22	5	624 019
	(25) 28	5	624 026
	(32) 35		624 033
	(40) 42		624 040
	(50) 54		624 057

Easytop-Combined slanted
seat valve KRV Basic
(free-flow valve with non-return valve),
with cylindrical male thread
in accordance with ISO 228
for flat sealing unions,
valve box made of gunmetal
in accordance with DIN 50930-6,
top made of brass,
with spindle transmission and
position indication open/closed,
with test socket and drain plug,
working pressure: 16 bar (PN 16),
working temperature: 90 °C,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	valve nominal width (thread connection)
2238.19	(15) 3/4	5	624 262
	(20) 1	5	624 279
	(25) 1 1/4	5	624 286
	(32) 1 1/2		624 293
	(40) 1 3/4		624 309
	(50) 2 3/8		624 316

Drain valve,
made of gunmetal,
with handwheel and lateral outlet,
suitable for Easytop slanted seat valve,

model	order details	packing unit	order code
	threaded connection
2234	1/4	5	457 334

Easytop-Drain valve elongation,
gunmetal,
for usage of drain valve
and insulating shell,

model	order details	packing unit	order code
	threaded connection x length
2234.5	1/4 x 50		553 654

Insulating shell,
suitable for Easytop Inox- and Easytop-
Slanted seat valve,
insulating thickness according to EnEV,
self-locking,

model	order details	packing unit	order code
	for valve nominal width
2210.10	15		488 550
	20		488 567
	25		488 574
	32		488 161
	40		488 178
	50		488 185

Easytop-Water sample extraction valve,
for sample extraction of drinking water,
bath and swimming pool water,
water contacting parts made of gunmetal
in accordance with DIN 50930-6,
outlet pipe made of stainless steel,
consists of control unit
and tapping valve,
tapping valve in mounted
condition closed,
control unit on the tapping valve
in 45° steps mountable,
in conjunction with the Easytop-Valve system,
with protection cap,

model	order details	packing unit	order code
	threaded connection
2234.1	1/4		576 370
	3/8		609 085

Easytop-Water extraction base,
for sample extraction of drinking water,
bath and swimming pool water,
suitable for
Easytop-Test-Actulating unit,
gunmetal according to DIN 50930-6,
with protection cap,

model	order details	packing unit	order code
	threaded connection
2234.4	1/4		609 092
	3/8		609 108

Easytop-Water extraction valve,
for sample extraction of drinking water,
bath and swimming pool water,
suitable for
Easytop-Test-Tapping valve,
water contacting parts made of gunmetal
in accordance with DIN 50930-6,
outlet pipe made of stainless steel,
actuating unit on the tapping valve
in 45° steps mountable,

model	order details	packing unit	order code
2234.7			609 115

Easytop-Circulation control valve,
with Viega-Press connections,
with SC-Contur,
shell and watercontactingparts
made of gunmetal in accordance
with DIN 50930-6,
temperature range 35° C-60°C,
self-instructed operator´s modul forthe
thermaldisinfection,
working pressure: 10 bar (PN10),
with DVGW-test mark,

model	order details	packing unit	order code
	valve nominal width (press connection)
2281	(15) 15		554 651
	(15) 18		554 668
	(20) 22		554 675

Easytop-Circulation control valve,
with cylindrical male thread
according to ISO 228 for
flatpacked unions,
shell and water contacting parts
made of gunmetal in accordance
with DIN 50930-6,
temperature range 35°C-60° C,
selfinstructed control valve forthe
thermaldisinfection,
working pressure: 10 bar (PN10),
with DVGW-test mark,

model	order details	packing unit	order code
	valve nominal width (threaded connection)
2281.1	(15) 3/4		554 682
	(20) 1		570 262

Insulating shell,
suitable for Easytop-
Circulation control valve,
insulating thickness in accordance
with EnEV,

model	order details	packing unit	order code
	for valve nominal width
2210.30	15/20		595 180

Easytop-Ball valve,
with Viega-Press connection,
with SC-Contur,
suitable for Easytop-
Circulation control valve
model 2281,
with plug-in end for press joints,
shell and water contacting parts
made of gunmetal in accordance
with DIN 50930-6,
with drain plug,
working pressure: 10 bar (PN 10),

model	order details	packing unit	order code
	press connection
2283	15		560 928
	18		560 935
	22		560 942

Easytop-Ball valve,
with Viega-Press connection,
with SC-Contur,
suitable for Easytop-
Circulation control valve
model 2281.1,
with flatpacked union for
cylindrical male thread
according to ISO 228,
shell and watercontacting parts
made of gunmetal in accordance
with DIN 50930-6,
with drain plug,
working pressure: 10 bar (PN 10),

model	order details	packing unit	order code
	press connection x threaded connection
2283.1	15 x 3/4		560 959
	18 x 3/4		560 966
	22 x 1		560 973

Easytop-Non return valve,
with Viega-Press connections,
with SC-Contur,
opening pressure &grgleich; 10 mbar,
therefore suitable for
circulation systems,
valve box and top made of
gunmetal in accordance
with DIN 50930-6,
with test socket and drain plug,
working pressure: 16 bar (PN 16),
working temperature: 90 °C,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	valve nominal width (press connection)
2239.5	(15) 15		570 279*
	(15) 18		570 286*
	(20) 22		570 293*
* only available from existing stock

Thermometer,
for Easytop-Circulation control valve,

model	order details	packing unit	order code
	temperature range
1026.5	0&bindestrichlang;80 °C		576 592

Temperature probe,
with adapter,
for Easytop-Circulation control valve,

model	order details	packing unit	order code
	cable length
1012	2500		576 608

Actulating drive,
(currentless closed),
suitable for Easytop-Circulation control valve,

model	order details	packing unit	order code
	Volt
1013.8			576 585

Control box,
suitable for Easytop-Circulation control valve,
suitable for actulating drive model 1013.8,
with plug connection rail
of 16 actulating drives,
output signal 24 V,
for DIN-rail-mounting,

model	order details	packing unit	order code
	h x w x d
1465.5	90 x 160 x 60		576 554

Easytop-Ball valve,
with Viega-Press connections,
with SC-Contur,
valve box made of gunmetal,
in accordance with
DIN 50930-6,
working pressure: 16 bar (PN 16),
working temperature: 90 °C,
with DVGW-test mark,

model	order details	packing unit	order code
	ball valve nominal width (press connection)
2270	(15) 15		475 857
	(15) 18		475 864
	(20) 22		475 871
	(25) 28		475 888
	(32) 35		475 895
	(40) 42		475 918
	(50) 54		475 925

Ball valve,
with Viega-Press connections,
with SC-Contur,
valve box made of gunmetal
in accordance with DIN 50930-6,
operating lever made of metal
black powder coated,
working pressure: 16 bar (PN 16),
working temperature: 90 °C,
with DVGW-test mark,

model	order details	packing unit	order code
	ball valve nominal width (press connection)
2270.10	(15) 15		590 437
	(15) 18		590 444
	(20) 22		590 451
	(25) 28		590 468
	(32) 35		590 475
	(40) 42		590 482
	(50) 54		590 499

Easytop-Ball valve,
with SC-Contur,
valve box made of gunmetal
in accordance with DIN 50930-6,
with press connection and female thread,
working pressure: 16 bar (PN 16),
working temperature: 90 °C,
with DVGW-test mark,

model	order details	packing unit	order code
	ball valve nominal width (female x press connection)
2270.4	(15) 15 x 1/2		587 147
	(15) 18 x 1/2		587 154
	(20) 22 x 3/4		587 161
	(25) 28 x 1		587 178
	(32) 35 x 1 1/4		587 185
	(40) 42 x 1 1/2		587 192
	(50) 54 x 2		587 208

Easytop-Ball valve,
valve box made of gunmetal
in accordance with DIN 50930-6,
with cylindrical male thread
according to ISO 228
for flat packed unions,
working pressure: 16 bar (PN 16),
working temperature: 90 °C,
with DVGW-test mark,

model	order details	packing unit	order code
	ball valve nominal width (male thread)
2270.1	(15) 3/4		587 024
	(20) 1		587 031
	(25) 1 1/4		587 048
	(32) 1 1/2		587 055
	(40) 1 3/4		587 062
	(50) 2 3/8		587 079

Insulating shell,
suitable for Easytop-Ball valves,
insulating thickness according to EnEV,
self-locking,

model	order details	packing unit	order code
	for ball valve nominal width
2210.20	15		564 704
	20		564 711
	25		564 728
	32		564 735
	40		564 742
	50		564 759

Easytop-Pump ball valve,
with Viega-Press connection,
with SC-Contur,
valve box made of gunmetal,
with pump flange and sleeve nut,
working pressure: 10 bar (PN 10),
working temperature: 90 °C,

model	order details	packing unit	order code
	ball valve nominal width (press connection x sleeve thread)
2270.8	(25) 28 x 1 1/2		587 215
	(32) 35 x 1 1/2		587 239
	(32) 35 x 2		587 222

Easytop-Pump ball valve,
with gravity valve,
with Viega-Press connection,
with SC-Contur,
valve box made of gunmetal,
opening pressure of the valve approx. 10 mbar,
with pump flange and sleeve nut,
working pressure: 10 bar (PN 10),
working temperature: 90 °C,

model	order details	packing unit	order code
	ball valve nominal width (press connection x sleeve thread)
2270.9	(25) 28 x 1 1/2		587 246
	(32) 35 x 1 1/2		587 260
	(32) 35 x 2		587 253

Ball valve,
with Viega press connections,
with SC-Contur,
valve box made of gunmetal
in accordance with DIN 50930-6,
operating lever made of plastic,
with DVGW-test mark,

model	order details	packing unit	order code
	press connection
2242	15		606 312
	18		606 329
	22		606 336

Ball valve,
with female thread,
valve box made of gunmetal
in accordance with DIN 50930-6,
operating lever made of plastic,
working pressure: 16 bar (PN16),
working temperature: 90°C,
with DVGW-test mark,

model	order details	packing unit	order code
	threaded connection
2242.2	1/2		606 299
	3/4		606 305

Ball valve,
gunmetal,
with capacity for plug
adapter model 2176,
for storey shut-offs,

model	order details	packing unit	order code
	DN
2143.8	15	10	591 144

Sanpress-Plug-adapter,
with SC-Contur,
with press connection,

model	order details	packing unit	order code
	d
2245	15		593 919*
	18		593 926*
* only available from existing stock

Pexfit Pro-Plug-in adapter set,
suitable with ball valve model 2143.8,
with press connection for Pexfit Pro-pipe,
set with 2 pieces,

model	order details	packing unit	order code
	d
4776	16		636 265
	20		636 272
	25		641 047

Extension,
for ball valve model 2143
and model 2143.8,

model	order details	packing unit	order code
	L
2143.5	25		584 894

Spare part putty,
for ball valve model 2143.8,

model	order details	packing unit	order code
	DN
2143.9	15	10	584 887

Prefabricated set,
with rosette,
wall sealing and hold,
suitable for ball valve
model 2143.8 and 2143,

model	order details	packing unit	order code
	DN
2143.60	15	1	584 900

Prefabricated set,
with rosette,
wall sealing and hold,
suitable for ball valve
model 2143.8 and 2143,

model	order details	packing unit	order code
	DN
2143.61	15	1	584 917

Prefabricated set,
with rosette,
wall sealing and hold,
suitable for ball valve
model 2143.8 and 2143,

model	order details	packing unit	order code
	DN
2143.62	15	10	584 924

Concealed free-flow valve,
with Viega press connections,
mit SC-Contur,
valve box and top made of gunmetal
in accordance with DIN 50930-6,
with upper parts,
with bare brick work protection,
installation depth from 40 up to 125 mm,
with DVGW-test mark,

model	order details	packing unit	order code
	press connection
2240	15		606 343
	18		606 459
	22		606 466

Concealed free-flow valve,
with female thread,
valve box and top made of
gunmetal in accordance with DIN 50930-6,
with uoper parts,
with bare brick work protection,
installation depth from 40 up to 125 mm,
with DVGW-test mark,

model	order details	packing unit	order code
	threaded connection
2240.2	1/2		606 473
	3/4		606 480

Easytop-Concealed straight seat valve,
with Viega-Press connections,
with SC-Contur,
valve box and top made of
gunmetal in accordance
with DIN 50930-6,
with upper part,
with bare brick work protection,
installation depth 40 to 125 mm,
with DVGW-test mark,

model	order details	packing unit	order code
	(valve nominal width) press connection
2235	(15) 15		595 937
	(15) 18		595 944
	(20) 22		596 750
	(25) 28		596 767

Easytop-Concealed straight seat valve,
with female thread,
valve box and top made of
gunmetal in accordance
with DIN 50930-6,
with upper part,
with bare brick work protection,
installation depth 40 to 125 mm,
with DVGW-test mark,

model	order details	packing unit	order code
	(valve nominal width) threaded connection
2235.1	(15) 1/2		595 906
	(20) 3/4		595 913
	(25) 1		595 920

Insulating shell,
suitable for Easytop-Concealed
straight seat valve,
insulating thickness according to EnEV,

model	order details	packing unit	order code
	for valve nominal width
2210.40	15&bindestrichlang;25		596 842

Concealed domestic water meter unit,
with Viega press connection,
with SC-Contur,
with concealed straight seat valve,
valve box and top made of
gunmetal in accordance with DIN 50930-6,
with upper part,
with bare brick work protection,
with connetion for measuring capsule Koax 6715,
without measuring capsule,
with blind flange,
max. working temperature 90 °C,
installation depth up to 77 mm,
with DVGW-test mark,

model	order details	packing unit	order code
	press connection
2231	22		624 446

Concealed domestic water meter unit,
with female thread,
with concealed straight seat valve,
valve box and top made of
gunmetal in accordance with DIN 50930-6,
with upper part,
with bare brick work protection,
with connection for measuring capsule Koax 6715,
without measuring capsule,
with blind flange,
max. working temperature 90 °C,
installation depth up to 77 mm,
with DVGW-test mark,

model	order details	packing unit	order code
	threaded connection
2231.1	3/4		624 477

Concealed domestic water meter unit,
with Viega press connections,
with SC-Contur,
with concealed straight seat valve,
valve box and top made of
gunmetal in accordance to DIN 50930-6,
with upper part,
with bare brick work protection,
with connection for measuring capsule Koax 6715,
without measuring capsule,
with blind flange,
in styrofoam box,
noise and heat insulated,
max. working temperature 90 °C,
installation depth up to 77 mm,
with DVGW-test mark,

model	order details	packing unit	order code
	press connection
2231.01	22		624 453

Concealed domestic water meter unit,
with female thread,
with concealed straight seat valve,
valve box and top made of
gunmetal in accordance with DIN 50930-6,
with upper part,
with bare brick work protection,
with connection for measuring capsule Koax 6715,
without measuring capsule,
with blind flange,
in styrofoam box,
noise and heat insulated,
max. working temperature 90 °C,
installation depth up to 77 mm,
with DVGW-test mark,

model	order details	packing unit	order code
	threaded connnection
2231.11	3/4		624 484

Concealed domestic water meter unit,
with Viega press connections,
with SC-Contur,
with two concealed straight seat valves,
valve box and top made of
gunmetal in accordance with DIN 50930-6,
with upper parts,
with bare brick work protection,
with connection for two measuring capsules,
without measuring capsules,
with blind flanges,
in styrofoam box,
noise and heat insulated,
max. working temperature 90 °C,
installation depth up to 77 mm,
with DVGW-test mark,

model	order details	packing unit	order code
	press connection
2231.02	22		624 460

Concealed domestic water meter unit,
with female thread,
with two concealed straight seat valves,
valve box and top made of
gunmetal in accordance with DIN 50930-6,
with upper parts,
with bare brick work protection,
with connection for two measuring capsules Koax 6715,
without measuring capsules,
with blind flanges,
in styrofoam box,
noise and heat insulated,
max. working temperature 90 °C,
installation depth up to 77 mm,
with DVGW-test mark,

model	order details	packing unit	order code
	threaded connection
2231.12	3/4		624 491

Mounting set front,
suitable for Easytop-Concealed
straight seat valve,
consists of tightening nuts,
washers and
self-adhesive seal flange,

model	order details	packing unit	order code
2235.90			596 811

Mounting set back,
suitable for Easytop-Concealed
straight seat valve,
consists of holding plate
with soundproofing,
fixing screws and
self-adhesive seal flange,

model	order details	packing unit	order code
2235.95			609 078

Visign for More 104-Trim set,
with flange,
wall seal and turning knob,
suitable for Easytop-
Concealed straight seat valve,
red and blue indentity rings,

model	order details	packing unit	order code
2236.10	chrome plated		596 835

Equipment set,
with flange, wall seal
and turning knob,
installation depth from 20 to 80 mm,
suitable for concealed straight seat valve
and concealed free-flow valve,

model	order details	packing unit	order code
2236	chrome plated/blue		275 075
	chrome plated/red		275 068

Cap,
administration model,
suitable for Easytop-Concealed
straight seat valve,

model	order details	packing unit	order code
2236.50	chrome plated		596 828

Easytop-Mounting unit,
with SC-Contur,
for water meter Qn 2,5,
with mounting plate made of stainless steel,
depth adjustable,
adjustable for horizontal and
vertical water meter installation,

inlet: with Easytop-Slanted seat valve,
with Geopress-Connection and
water meter union,
leadable,
valve body and water contacting parts
made of gunmetal in accordance
with DIN 50930-6,
valve seat made of stainless steel,
with spindle transmission and
position indication open/closed,

outlet: Easytop-Combined
slanted seat valve KRV (free
flow valve with non-return valve)
with female thread,
in accordance
with DIN EN 10226
and water meter union,
length adjustable,
valve body and water contacting parts
made of gunmetal in accordance
with DIN 50930-6,
valve seat made of stainless steel,
with spindle transmission and
position indication open/closed,
with test socket and drain plug,

with fixing set,

working pressure: 16 bar (PN 16),
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	(water meter size) Geopress-Connection x threaded connection
2230.15	(2,5) 40 x 1		553 593

Easytop-Mounting unit,
for water meter Qn 2,5 and Qn 6,0,
with mounting plate made of stainless steel,
depth adjustable,
adjustable for horizontal and
vertical water meter installation,

inlet: with Easytop-Slanted seat valve,
with female thread in accordance with
DIN EN 10226
and water meter union,
leadable,
valve body and water contacting parts
made of gunmetal in accordance
with DIN 50930-6,
valve seat made of stainless steel,
with spindle transmission and
position indication open/closed,

outlet: Easytop-Combined
slanted seat valve KRV (free flow valve with
non-return valve) with female thread,
in accordance with DIN EN 10226
and water meter union,
length adjustable,
valve body and water contacting parts
made of gunmetal in accordance
with DIN 50930-6,
valve seat made of stainless steel,
with spindle transmission and
position indication open/closed,
with test socket and drain plug,

with fixing set,

working pressure: 16 bar (PN 16),
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	(water meter size) threaded connection x threaded connection
2230.11	(2,5) 1 x 1		553 609
	(6,0) 1 1/4 x 1 1/4		553 616

Easytop-Mounting unit,
with SC-Contur,
for water meter Qn 2,5,
with mounting plate made of stainless steel,
depth adjustable,
adjustable for horizontal and
vertical water meter installation,

inlet: with Easytop-Slanted seat valve,
with Geopress-Connection
and water meter union,
leadable,
valve body and water contacting parts
made of gunmetal in accordance
with DIN 50930-6,
valve seat made of stainless steel,
with spindle transmission and
position indication open/closed,

outlet: water meter union
with male thread in accordance
with DIN EN 10226,
length adjustable,
water contacting parts made of gunmetal
in accordance with DIN 50930-6,

with fixing set,

working pressure: 16 bar (PN 16),
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	(water meter size) Geopress-Connection x threaded connection
2230.25	(2,5) 32 x 1		553 623
	(2,5) 40 x 1		553 630

Easytop-Mounting unit,
for water meter Qn 2,5 and Qn 6,0,
with mounting plate made of stainless steel,
depth adjustable,
adjustable for horizontal and
vertical water meter installation,

inlet: with Easytop-Slanted seat valve,
with female thread in accordance
with DIN EN 10226
and water meter union,
leadable,
valve body and water contacting parts
made of gunmetal in accordance
with DIN 50930-6,
valve seat made of stainless steel,
with spindle transmission and
position indication open/closed,

outlet: water meter union
with male thread in accordance
with DIN EN 10226,
length adjustable,
water contacting parts made of gunmetal
in accordance with DIN 50930-6,

with fixing set,

working pressure: 16 bar (PN 16),
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	(water meter size) threaded connection x threaded connection
2230.21	(2,5) 1 x 1		553 647
	(6,0) 1 1/4 x 1 1/4		554 354

Water meter bow,
for water meter Qn 2,5, Qn 6,0 and Qn 10,0,
with mounting plate made of stainless steel,
depth adjustable,
adjustable for horizontal and
vertical water meter installation,

inlet: with water meter union,
with male thread in accordance
with DIN EN 10226,
leadable,
water contacting parts made of gunmetal
in accordance with DIN 50930-6,

outlet: water meter union
with male thread in accordance
with DIN EN 10226,
length adjustable,
water contacting parts made of gunmetal
in accordance with DIN 50930-6,

with fixing set,

working pressure: 16 bar (PN 16),
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	(water meter size) threaded connection x threaded connection
2230.70	(2,5) 1 x 1		554 415
	(6,0) 1 1/4 x 1 1/4		554 422
	(10,0) 1 1/2 x 1 1/2		554 439

Easytop-Slanted seat valve,
with SC-Contur,
with Geopress-Connection (inlet)
and female thread in accordance with
DIN EN 10226 (outlet),
suitable for water meter bow
model 2230.70,
valve body and water contacting parts
made of gunmetal in accordance
with DIN 50930-6,
valve seat made of stainless steel,
with spindle transmission and
position indication open/closed,

working pressure: 16 bar (PN 16),
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	valve nominal width (Geopress-Connection x threaded connection)
2230.55	(25) 32 x 1		554 361
	(25) 40 x 1		554 378

Easytop-Slanted seat valve,
with SC-Contur,
with Sanpress-Connection (inlet)
and female thread in accordance with
DIN EN 10226-1 (outlet),
suitable for the water meter
connecting plate model 2230.70,
valve body and watercontacting parts
made of gunmetal in accordance
with DIN 50930-6,
valve seat made of stainless steel,
with spindle transmission and
position indication open/closed,

working pressure: 16 bar (PN 16),
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	valve nominal width (Sanpress-Connection x threaded connection)
2230.50	(25) 28 x 1		586 843
	(32) 35 x 1 1/4		586 959
	(40) 42 x 1 1/2		586 966
	(50) 54 x 21		586 973

¹⁾ Article 586 973 as open adapter and
not suitable for water meter connecting-
plate model 2230.70

Easytop-Slanted seat valve,
with female thread on both sides
in accordance with DIN EN 10226
suitable for water meter bow
model 2230.70,
valve body and water contacting parts
made of gunmetal in accordance
with DIN 50930-6,
valve seat made of stainless steel,
with spindle transmission and
position indication open/closed,

working pressure: 16 bar (PN 16),
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	valve nominal width (threaded connection)
2230.51	(25) 1		554 385
	(32) 1 1/4		554 392
	(40) 1 1/2		554 408

Easytop-Combined slanted set valve KRV
(free flow valve with non-return valve),
with SC-Contur,
with female thread in accordance
with DIN EN 10226,
(inlet) and Sanpress-Connection
(outlet),
suitable for water meter connecting plate
model 2230.25 and 2230.21 as well as for
water meter bow model 2230.70,
valve body and water contacting parts
made of gunmetal in accordance
with DIN 50930-6,
valve seat made of stainless steel,
with spindle transmission and
position indication open/closed,
with test socket and drain plug,

working pressure: 16 bar (PN 16),
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	valve nominal width (threaded connection x Sanpress-Connection)
2230.90	(25) 28 x 1		554 446
	(32) 35 x 1 1/4		554 453

Easytop-Combined slanted seat valve KRV
(free flow valve with non-return valve),
female thread on both sides
in accordance with DIN EN 10226,
suitable for water meter connecting plate
model 2230.25 and 2230.21 as well as for
water meter bow model 2230.70,
valve body and water contacting parts
made of gunmetal in accordance
DIN 50930-6,
valve seat made of stainless steel,
with spindle transmission and
position indication open/closed,
with test socket and drain plug,

working pressure: 16 bar (PN 16),
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	valve nominal width (threaded connection)
2230.91	(25) 1		554 460
	(32) 1 1/4		554 477
	(40) 1 1/2		554 484

Geopress-Rotatable
elbow connection coupling 90°,
with SC-Contur,
gunmetal,
male thread,

model	order details	packing unit	order code
	Geopress-Connection x threaded connection
9620.1	32 x 1		593 995
	40 x 1		594 008
	40 x 1 1/4		594 015
	50 x 1 1/2		594 022

Sanpress-Union,
with SC-Contur,
gunmetal,
flat sealing,

model	order details	packing unit	order code
	press connection x threaded connection
2263	15 x 3/4		265 663
	18 x 3/4		283 391
	22 x 1		265 687
	28 x 1 1/4		265 700
	35 x 1 1/2		265 731
	42 x 1 3/4		265 304
	54 x 2 3/8		265 328

Sanfix P-Union,
with SC-Contur,
gunmetal,
flat sealing,

model	order details	packing unit	order code
	Sanfix P-connection x threaded connection
2163	16 x 3/4	5	435 240
	20 x 3/4	5	435 455
	25 x 1		566 630
	32 x 1 1/4		566 647
	40 x 1 1/2		595 791
	50 x 1 3/4		566 661
	63 x 2 3/8		595 807

Pexfit Pro-Union,
made of gunmetal,
flat sealing,

model	order details	packing unit	order code
	d x G
4763	16 x 3/4	5	608 385
	18 x 3/4	5	608 408
	20 x 3/4	5	608 422
	25 x 3/4	5	608 439

Union,
gunmetal,
flat sealing,

model	order details	packing unit	order code
	d x G
2763	32 x 1 1/4		588 403
	40 x 1 1/4		588 410
	50 x 1 3/4		588 427

Easytop-Slanted seat valve upper part,
valve top made of gunmetal
in accordance with DIN 50930-6,
with spindle transmission and
position indication open/closed,
handwheel with interchangeable
medium mark green/red,
for Easytop-slanted seat valve
model 2237 and 2237.1,

model	order details	packing unit	order code
	for valve nominal width
2237.20	15		474 782
	20		474 799
	25		474 805
	32		474 812
	40		474 829
	50		474 836

Easytop-KRV-valve upper part,
valve top made of gunmetal
in accordance with DIN 50930-6,
with spindle transmission and
position indication open/closed,
handwheel with interchangeable
medium mark green/red,
for Easytop-KRV
model 2238 and 2238.1,

model	order details	packing unit	order code
	for valve nominal width
2238.20	15		474 942
	20		474 959
	25		474 966
	32		474 973
	40		474 980
	50		474 997

Easytop-Non return valve upper part,
valve top made of gunmetal
in accordance with DIN 50930-6,
suitable for Easytop-Non return valves
models 2239 and 2239.1,

model	order details	packing unit	order code
	for valve nominal width
2239.20	15		481 186
	20		481 193
	25		481 209
	32		481 216
	40		481 223
	50		481 230

Handle,
made of plastic,
suitable for Easytop-System stop valve,

model	order details	packing unit	order code
	outer-&durchmesser; (for valve nominal width)
2237.21	55 (15, 20)	5	474 843
	70 (25, 32)	5	474 850
	90 (40, 50)	5	474 867

Cover,
made of plastic,
suitable for Easytop-System stop valve handle
model 2237.21,

model	order details	packing unit	order code
	external-&durchmesser;, (for external handle-&durchmesser;)
2237.23	25 (55)  green	5	474 881
	35 (70)  green	5	474 898
	45 (90)  green	5	474 904
	25 (55)  red	5	474 911
	35 (70)  red	5	474 928
	45 (90)  red	5	474 935

Handle,
made of plastic,
suitable for Easytop-drain valve,

model	order details	packing unit	order code
	outer-&durchmesser;
2234.20	30	5	474 874

Lever,
made of plastic,
suitable for Easytop-ball valves,

model	order details	packing unit	order code
	internal-&durchmesser; (for ball valve nominal diameter)
2270.21	30 (15, 20)	5	588 847
	35 (25, 32)	5	590 253
	40 (40, 50)	5	590 260

Lever,
made of plastic,
flat model,
suitable for Easytop-ball valves,

model	order details	packing unit	order code
	internal-&durchmesser; (for ball valve nominal diameter)
2270.22	30 (15, 20)	5	590 277*
	35 (25, 32)	5	590 284*
	40 (40, 50)	5	590 291*
* only available from existing stock

Cover,
made of plastic,
suitable for Easytop-ball valves,

model	order details	packing unit	order code
	lever internal-&durchmesser;
2270.23	30  red	5	590 307
	35  red	5	590 314
	40  red	5	590 321
	30  green	5	590 338
	35  green	5	590 345
	40  green	5	590 352
	30  blue	5	590 369
	35  blue	5	590 376
	40  blue	5	590 383

Lever,
made of metal,
by demand of non-combustible components,
suitable for Easytop-ball valves,

model	order details	packing unit	order code
	for ball valve nominal diameter
2270.26	15, 20	5	590 390
	25	5	590 406
	32	5	590 413
	40, 50	5	590 420

Easytop-Slanted seat valve
(free-flow valve),
with Viega-Press connections,
with SC-Contur,
valve box and top made of
gunmetal in accordance
with DIN 50930-6,
valve seat made of
stainless steel,
with spindle transmission and
position indication open/closed,
handwheel with interchangeable
medium mark green/red,
with drain plug,
working pressure: 16 bar (PN 16),
working temperature: 90 °C,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	valve nominal width (press connection)
2237	(15) 15	5	457 051
	(15) 18	5	457 068
	(20) 22	5	457 075
	(25) 28	5	457 082
	(32) 35		457 099
	(40) 42		457 105
	(50) 54		457 129

Easytop-Slanted seat valve
(Free-flow valve),
with Sanfix P-connections,
with SC-Contur,
valve box and top made of
gunmetal in accordance
with DIN 50930-6,
valve seat made of
stainless steel,
with spindle transmission and
position indication open/closed,
handwheel with interchangeable
medium mark green/red,
with drain plug,
working pressure: 16 bar (PN 16),
working temperature: 90°C,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	valve nominal width (Sanfix P-connection)
2137	(15) 16	5	595 456
	(15) 20	5	595 463
	(20) 25	5	595 470

Easytop-Slanted seat valve
(free-flow valve),
with cylindrical male thread
in accordance with ISO 228 for
flat sealing unions,
valve box and top made of
gunmetal in accordance
with DIN 50930-6,
valve seat made of
stainless steel,
with spindle transmission and
position indication open/closed,
handwheel with interchangeable
medium mark green/red,
with drain plug,
working pressure: 16 bar (PN 16),
working temperature: 90 °C,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	valve nominal width (threaded connection)
2237.1	(15) 3/4	5	457 136
	(20) 1	5	457 143
	(25) 1 1/4	5	457 150
	(32) 1 1/2		457 167
	(40) 1 3/4		457 174
	(50) 2 3/8		457 181

Easytop-Combined slanted
seat valve KRV (free-flow valve
with non-return valve),
with Viega-Press connections,
with SC-Contur,
valve box and top made of
gunmetal in accordance
with DIN 50930-6,
valve seat made of
stainless steel,
with spindle transmission and
position indication open/closed,
handwheel with interchangeable
medium mark green/red,
with test socket and drain plug,
working pressure: 16 bar (PN 16),
working temperature: 90 °C,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	valve nominal width (press connection)
2238	(15) 15	5	457 198
	(15) 18	5	457 204
	(20) 22	5	457 211
	(25) 28	5	457 228
	(32) 35		457 235
	(40) 42		457 242
	(50) 54		457 259

Easytop-Combined slanted
seat valve KRV (free-flow valve
with non-return valve),
with Sanfix P-connections,
with SC-Contur,
valve box and top made of
gunmetal in accordance
with DIN 50930-6,
valve seat made of
stainless steel,
with spindle transmission and
position indication open/closed,
handwheel with interchangeable
medium mark green/red,
with test socket and drain plug,
working pressure: 16 bar (PN 16),
working temperature: 90°C,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	valve nominal width (Sanfix P-connection)
2138	(15) 16	5	595 531
	(15) 20	5	595 548
	(20) 25	5	595 555

Easytop-Combined slanted
seat valve KRV (free-flow valve
with non-return valve),
with cylindrical male thread
in accordance with ISO 228,
for flat packed unions,
valve box and top made of
gunmetal in accordance
with DIN 50930-6,
valve seat made of
stainless steel,
with spindle transmission and
position indication open/closed,
handwheel with interchangeable
medium mark green/red,
with test socket and drain plug,
working pressure: 16 bar (PN 16),
working temperature: 90 °C,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	valve nominal width (threaded connection)
2238.1	(15) 3/4	5	457 266
	(20) 1	5	457 273
	(25) 1 1/4	5	457 280
	(32) 1 1/2		457 303
	(40) 1 3/4		457 310
	(50) 2 3/8		457 327

Easytop-Non return valve,
with Viega-Press connections,
with SC-Contur,
valve box and top made of
gunmetal in accordance
with DIN 50930-6,
valve seat made of
stainless steel,
with test socket and drain plug,
working pressure: 16 bar (PN 16),
working temperature: 90 °C,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	valve nominal width (press connection)
2239	(15) 15	5	471 019
	(15) 18	5	471 026
	(20) 22	5	471 033
	(25) 28	5	471 040
	(32) 35		471 156
	(40) 42		471 163
	(50) 54		471 170

Easytop-Non return valve,
with cylindrical male thread
in accordance with ISO 228,
for flat packed unions,
valve box and top made of
gunmetal in accordance
with DIN 50930-6,
valve seat made of
stainless steel,
with test socket and drain plug,
working pressure: 16 bar (PN 16),
working temperature: 90 °C,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	valve nominal width (threaded connection)
2239.1	(15) 3/4	5	471 187
	(20) 1	5	471 194
	(25) 1 1/4	5	471 200
	(32) 1 1/2		471 217
	(40) 1 3/4		471 224
	(50) 2 3/8		471 231

Easytop XL-Slanted seat valve
(free flow valve),
with flange connection in accordance with DIN 2501,
valve box and top made of
gunmetal in accordance with DIN 50930-6,
valve seat made of stainless steel,
with spindle transmission and
position indication open/closed,
handwheel with interchangeable
medium mark green/red,
with drain plug,
working pressure: 16 bar (PN 16),
working temperature: 90 °C,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	flange connection
2237XL	50		624 323
	65		624 330
	80		624 347
	100		624 354

Easytop XL-Non return valve,
with flange connection in accordance with DIN 2501,
valve box and top made of
gunmetal in accordance with DIN 50930-6,
valve seat made of stainless steel,
with test socket and drain plug,
working pressure: 16 bar (PN16),
working temperature: 90°C,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	flange connection
2239XL	50		624 408
	65		624 415

Hinweis:
Lieferbar ab Mai 2010!

Drain valve,
made of gunmetal,
with handwheel and lateral outlet,
suitable for Easytop slanted seat valve,

model	order details	packing unit	order code
	threaded connection
2234	1/4	5	457 334
	3/8		640 989

Easytop-Drain valve elongation,
gunmetal,
for usage of drain valve
and insulating shell,

model	order details	packing unit	order code
	threaded connection x length
2234.5	1/4 x 50		553 654

Insulating shell,
suitable for Easytop Inox- and Easytop-
Slanted seat valve,
insulating thickness according to EnEV,
self-locking,

model	order details	packing unit	order code
	for valve nominal width
2210.10	15		488 550
	20		488 567
	25		488 574
	32		488 161
	40		488 178
	50		488 185

Easytop Inox-Slanted seat valve
(Free-flow valve),
with Viega-Press connections,
with SC-Contur,
made of stainless steel,
with spindle transmission and
position indication open/closed,
handwheel with interchangeable
medium mark green/red,
with drain plug,
working pressure: 16 bar (PN 16)
working temperature: 90 °C,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	valve nominal width (press connection)
2337	(15) 15	5	468 392
	(15) 18	5	468 408
	(20) 22	5	468 415
	(25) 28	5	468 422
	(32) 35		468 439
	(40) 42		468 446
	(50) 54		468 453

Easytop Inox-Combined slanted
seat valve KRV (free-flow valve
with non-return valve),
with Viega-Press connections,
with SC-Contur,
made of stainless steel,
with spindle transmission and
position indication open/closed,
handwheel with interchangeable
medium mark green/red,
with test socket and drain plug,
working pressure: 16 bar (PN 16)
working temperature: 90 °C,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	valve nominal width (press connection)
2338	(15) 15	5	468 460
	(15) 18	5	468 477
	(20) 22	5	468 484
	(25) 28	5	468 491
	(32) 35		468 507
	(40) 42		468 514
	(50) 54		468 521

Easytop Inox-Non return valve,
with Viega-Press connections,
with SC-Contur,
made of stainless steel,
with test socket and drain plug,
working pressure: 16 bar (PN 16),
working temperature: 90 °C,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	valve nominal width (press connection)
2339	(15) 15	5	471 255
	(15) 18	5	471 262
	(20) 22	5	471 279
	(25) 28	5	471 286
	(32) 35		471 293
	(40) 42		471 309
	(50) 54		471 316