Shuts off the flow of gas when it exceeds
a certain predetermined flow rate
due to not intended gas leakage.

Profipress G-Gas excess flow valve,
Type M/K,
with SC-Contur,
gunmetal,
working pressure: 15 to 100mbar,
inlet: male thread,
outlet: Profipres G-press connection,
high termally stable, 650°C/30 min,
with DVGW-G-test mark,

model	order details	packing unit	order code
	threaded connection x (VGas in m3x press connection
2641.2HT	1 x 28 x (2,5)		653 156
	1 x 28 x (4,0)		653 163
	1 x 28 x (6,0)		653 170
	1 1/4 x 35 x (6,0)		653 187
	1 1/4 x 35 x (10,0)		653 194

Gas excess flow valve,
Type M/K,
made of brass,
working pressure: 15 to 100 mbar,
inlet: male thread,
outlet: female thread,
high thermally stable, 650°C/30 min,
with DVGW-G-test mark,

model	order details	packing unit	order code
	threaded connection x (VGas in m3/h)
2647.2HT	3/4 x (2,5)		653 316
	3/4 x (4,0)		653 323
	1 x (2,5)		653 330
	1 x (4,0)		653 347
	1 x (6,0)		653 354
	1 1/4 x (6,0)		653 361
	1 1/4 x (10,0)		653 378
	1 1/2 x (10,0)		653 385
	1 1/2 x (16,0)		653 392
	2 x (16,0)		653 415

Gas excess flow valve,
Type K,
made of brass,
working pressure: 15 to 100 mbar,
kind of installation: vertical upwards,
inlet: male thread,
outlet: female thread,
high thermally stable, 650°C/30 min,
with DVGW-G-test mark,

model	order details	packing unit	order code
	threaded connection x (VGas in m3/h)
2647.2TO	3/4 x (2,5)		653 491
	3/4 x (4,0)		653 507
	1 x (2,5)		653 514
	1 x (4,0)		653 521
	1 x (6,0)		653 538
	1 1/4 x (6,0)		653 545
	1 1/4 x (10,0)		653 552

Gas excess flow valve,
Type M/K,
made of brass,
working pressure: 15 to 100 mbar,
inlet: female thread,
outlet: male thread,
high thermally stable, 650°C/30 min,
with DVGW-G-test mark,

model	order details	packing unit	order code
	threaded connection x (VGas in m3/h)
2647.1HT	3/4 x (2,5)		653 200
	3/4 x (4,0)		653 217
	1 x (2,5)		653 224
	1 x (4,0)		653 231
	1 x (6,0)		653 248
	1 1/4 x (6,0)		653 255
	1 1/4 x (10,0)		653 262
	1 1/2 x (10,0)		653 279
	1 1/2 x (16,0)		653 286
	2 x (10,0)		653 293
	2 x (16,0)		653 309

Gas excess flow valve,
Type K,
made of brass,
working pressure: 15 to 100 mbar,
kind of installation: vertical upwards,
inlet: female thread,
outlet: male thread,
high thermally stable, 650°C/30 min,
with DVGW-G-test mark,

model	order details	packing unit	order code
	threaded connection x (VGas in m3/h)
2647.1TO	3/4 x (2,5)		653 422
	3/4 x (4,0)		653 439
	1 x (2,5)		653 446
	1 x (4,0)		653 453
	1 x (6,0)		653 460
	1 1/4 x (6,0)		653 477
	1 1/4 x (10,0)		653 484

Gas meter union,
with gas excess flow valve,
for easy retrofitting from GS in
existing systems with double-pipe
gas meter connector,
Kind of installation: vertical downward,
high thermally stable, 650°C/30 min,
with DVGW-G test mark,

model	order details	packing unit	order code
	threaded connection x (VGas in m3/h) x sleeve connection
2649S	1 x 1 1/4 x (2,5)		618 827
	1 x 1 1/4 x (4,0)		618 834
	1 x 1 1/4 x (6,0)		618 841

Profipress G-Ball valve,
with press connection,
with SC-Contur,
valve body made of gunmetal,
lockable,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-G-test mark,

model	order details	packing unit	order code
	ball valve nominal width (press connection)
2670	(15) 15		492 854
	(15) 18		492 861
	(20) 22		492 878
	(25) 28		492 885
	(32) 35		492 892
	(40) 42		492 908
	(50) 54		492 915

Profipress G-Ball valve,
with SC-Contur,
valve body made of gunmetal,
with press connection and female thread,
lockable,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-G-test mark,

model	order details	packing unit	order code
	ball valve nominal width (female thread x press connection)
2670.4	(15) 15 x 1/2		587 369
	(15) 18 x 1/2		587 376
	(20) 22 x 3/4		587 383
	(25) 28 x 1		587 390
	(32) 35 x 1 1/4		587 406
	(40) 42 x 1 1/2		587 413
	(50) 54 x 2		587 420

Profipress G-Ball valve,
with press connection,
with SC-Contur,
valve body made of gunmetal,
with testing opening,
operating handle made of steel plate
yellow powder-coated,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-G-test mark,

model	order details	packing unit	order code
	ball valve nominal width (press connection)
2671	(15) 18		587 437
	(20) 22		587 444
	(25) 28		587 451

Profipress G-Ball valve,
with SC-Contur,
valve body made of gunmetal,
with testing opening,
inlet: female thread,
outlet: Profipress G-Press connection,
operating handle made of steel plate
yellow powder coated,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-G-test mark,

model	order details	packing unit	order code
	ball valve nominal width (female thread x press connection)
2671.3	(20) 3/4 x 22		587 468
	(25) 3/4 x 28		587 475
	(25) 1 x 22		659 318
	(25) 1 x 28		638 887

Gas-Ball valve,
brass,
straight version,
female thread on both sides,
heavy version,
lockable, leadable,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-G-test mark,

model	order details	packing unit	order code
	threaded connection
G2101	(15) 1/2		525 934
	(20) 3/4		525 941
	(25) 1		525 958
	(32) 1 1/4		532 550
	(40) 1 1/2		532 567
	(50) 2		532 574

Gas-Ball valve,
body made of gunmetal,
with testing opening,
inlet: male thread,
outlet: female thread,
operating handle made of steel plate
yellow powder coated,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-G-test mark,

model	order details	packing unit	order code
	threaded connection
2671.5	3/4		586 928

Gas-Ball valve,
with thermal shut off facility valve,
brass,
straight version,
installation as main shutt off valve
in domestic installation,
securing of heating appliances and
heaters for water domestic use,
female thread on both sides,
heavy version,
lockable, leadable,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-G-test mark,

model	order details	packing unit	order code
	threaded connection
G2101T	(15) 1/2		526 870
	(20) 3/4		526 887
	(25) 1	5	526 894
	(32) 1 1/4		527 716
	(40) 1 1/2		527 723
	(50) 2		527 730

Profipress G-Gas meter ball valve,
with SC-Contur,
brass,
for single-pipe gas meter connector,
straight-way type,
with wall mounting and fixing set,
on both sides formed
Profipress G-Press connection,
lockable, leadable,
with testing opening,
ambient temperature max. 70 °C,
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-G-test mark,

model	order details	packing unit	order code
	press connection x (VGas in m3/h)
2645	28		632 717

with thermal shut off facility valve,

model	order details	packing unit	order code
	press connection x (VGas in m3/h)
2645T	28		632 724

with gas excess flow valve type K,
working pressure 15 to 100 mbar,

model	order details	packing unit	order code
	press connection x (VGas in m3/h)
2645S	28 x (2,5)		618 124
	28 x (4,0)		618 131
	28 x (6,0)		618 148

Profipress G-Gas meter ball valve,
with SC-Contur,
brass,
for single-pipe gas meter connector,
straight version,
with wall mounting/fixing set,
Profipress G-Union on both sides,
lockable, leadable,
with test screw,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-G-test mark,

model	order details	packing unit	order code
	press connection
G2112	22		528 669

Gas meter ball valve,
brass,
for single-pipe gas meter connector,
straight version,
with wall mounting/fixing set,
union with female thread on both sides,
lockable, leadable,
with test screw,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-G-test mark,

model	order details	packing unit	order code
	threaded connection x (VGas in m3/h)
G2112.1	1		527 983

with thermal shut off facility valve,

model	order details	packing unit	order code
	threaded connection x (VGas in m3/h)
G2112.1T	1		527 976

with gas excess flow valve type K,
pressure range 15 to 100 mbar,

model	order details	packing unit	order code
	threaded connection x (VGas in m3/h)
G2112.1S	1 x (2,5)		618 308
	1 x (4,0)		618 315
	1 x (6,0)		618 322

Gas meter ball valve,
brass,
for single-pipe gas meter connector,
straight version,
with wall mounting/fixing set,
union connection 1 3/8" on both sides,
lockable, leadable,
with test screw,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-G-test mark,

model	order details	packing unit	order code
	union- connection x (VGas in m3/h)
G2112.2	1 3/8		530 051

with thermal shut off facility valve,

model	order details	packing unit	order code
	threaded joint- connection x (VGas in m3/h)
G2112.2T	1 3/8		530 068

with gas excess flow valve type K,
pressure range 15 to 100 mbar,

model	order details	packing unit	order code
	threaded joint- connection x (VGas in m3/h)
G2112.2S	1 3/8 x (2,5)		618 339
	1 3/8 x (4,0)		618 346
	1 3/8 x (6,0)		618 353

Profipress G-Gas meter angled ball valve,
with SC-Contur,
brass,
for single-pipe gas meter connector,
inlet: male thread,
outlet: Profipress G-Press connection,
lockable, leadable,
with testing opening,
ambient temperature max. 70 °C,
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-G-test mark,

model	order details	packing unit	order code
	threaded connection x (VGas in m3/h) x press connection
2644	1 x 28		632 731

with thermal shut off facility valve,

model	order details	packing unit	order code
	threaded connection x (VGas in m3/h) x press connection
2644T	1 x 28		632 748

with gas excess flow valve type K,
working pressure 15 to 100 mbar,

model	order details	packing unit	order code
	threaded connection x (VGas in m3/h) x press connection
2644S	1 x 28 x (2,5)		618 216
	1 x 28 x (4,0)		618 223
	1 x 28 x (6,0)		618 230

Profipress G-Gas meter angled ball valve,
with SC-Contur,
brass,
for single-pipe gas meter connector,
inlet: male thread,
outlet: Profipress G-Union,
lockable, leadable,
with test screw,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-G-test mark,

model	order details	packing unit	order code
	threaded connection x press connection
G2111	1 x 22	10	528 195

with thermal shut off facility valve,

model	order details	packing unit	order code
	threaded connection x press connection
G2111T	1 x 22	10	528 201*
* only available from existing stock

Gas meter angle ball valve,
brass,
for single-pipe gas meter connector,
inlet: male thread,
outlet: union with
female thread Rp1,
lockable, leadable,
with test screw,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-G-test mark,

model	order details	packing unit	order code
	threaded connection x (VGas in m3/h)
G2111.2	1		526 283

with thermal shut off facility valve,

model	order details	packing unit	order code
	threaded connection x (VGas in m3/h)
G2111.2T	1		526 818

with gas excess flow valve type K,
pressure range 15 to 100 mbar,

model	order details	packing unit	order code
	threaded connection x (VGas in m3/h)
G2111.2S	1 x (2,5)		618 452
	1 x (4,0)		618 469
	1 x (6,0)		618 476

Gas meter angle ball valve,
brass,
for single-pipe gas meter connector
G10 and G16,
inlet: male thread,
outlet: union with
female thread Rp1 1/2,
lockable, leadable,
with test screw,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-G-test mark,

model	order details	packing unit	order code
	threaded connection
G2111.5	1 1/2		527 204

Gas meter angle ball valve,
brass,
for single-pipe gas meter connector,
inlet: male thread,
outlet: union with
male thread R1,
lockable, leadable,
with test screw,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-G-test mark,

model	order details	packing unit	order code
	threaded connection x (VGas in m3/h)
G2111.1	1	10	525 088

with thermal shut off facility valve,

model	order details	packing unit	order code
	threaded connection x (VGas in m3/h)
G2111.1T	1		526 801

with gas excess flow valve type K,
pressure range 15 to 100 mbar,

model	order details	packing unit	order code
	threaded connection x (VGas in m3/h)
G2111.1S	1 x (2,5)		618 483
	1 x (4,0)		618 490
	1 x (6,0)		618 506

Gas meter angle ball valve,
brass,
for single-pipe gas meter connector,
inlet: male thread,
outlet: union connection 1 3/8",
lockable, leadable,
with test screw,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-G-test mark,

model	order details	packing unit	order code
	threaded connection x (VGas in m3/h)
G2111.3	1		529 925

with thermal shut off facility valve,

model	order details	packing unit	order code
	threaded connection x (VGas in m3/h)
G2111.3T	1		536 428

with gas excess flow valve type K,
pressure range 15 to 100 mbar,

model	order details	packing unit	order code
	threaded connection x (VGas in m3/h)
G2111.3S	1 x (2,5)		618 513
	1 x (4,0)		618 520
	1 x (6,0)		618 537

Profipress G-Manifold unit,
with SC-Contur,
made of welded steel pipe
yellow powder coated,
for single-pipe gas meter connector,
for line mounting of two
or three single-pipe gas meter connector,
sealed gas meter angled ball valves
made of brass,
with Profipress G-Union 28 mm,
with wall mounting,
female thread, left,
male thread, right,
line mounting possible using multiple manifolds,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-G-test mark,

model	order details	packing unit	order code
	manifold connection x (VGas in m3/h) x meter quantity
G2345S	1 1/2 x 2 x (2,5)		618 155
	1 1/2 x 2 x (4,0)		618 162
	1 1/2 x 2 x (6,0)		618 179
	1 1/2 x 3 x (2,5)		618 186
	1 1/2 x 3 x (4,0)		618 193
	1 1/2 x 3 x (6,0)		618 209

Manifold unit,
for single-pipe gas meter connector,
for line mounting of two
or three single-pipe gas meter connector,
made of welded steel pipe
yellow powder coated,
sealed gas meter angle ball valves
brass,
with outlet union Rp1,
with wall mounting,
female thread, left,
male thread, right,
line mounting of
multiple manifold units possible,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-G-test mark,

model	order details	packing unit	order code
	manifold connection x (VGas in m3/h) x meter quantity
G2345.1S	1 1/2 x 2 x (2,5)		618 360
	1 1/2 x 2 x (4,0)		618 377
	1 1/2 x 2 x (6,0)		618 384
	1 1/2 x 3 x (2,5)		618 391
	1 1/2 x 3 x (4,0)		618 407
	1 1/2 x 3 x (6,0)		618 414

Manifold unit,
made of welded steel pipe
yellow powder coated,
for single-pipe gas meter connector,
for line mounting of two
or three single-pipe meter connector,
with wall mounting,
female thread, left,
male thread, right,
line mounting possible using multiple manifolds,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,

model	order details	packing unit	order code
	manifold connection x fitting connection x meter quantity
G2345.0	1 1/2 x 2		556 853
	1 1/2 x 3		556 877

Profipress G-Union,
with SC-Contur,
gunmetal,
conical sealing,
for connection with
gas ball valves and gas valves,

model	order details	packing unit	order code
	d x G
2661	22 x 1 3/8	5	408 237
	28 x 1 3/8	5	351 137

Union,
brass,
conical sealing,
with female thread,
for connection to
gas ball valves and gas valves,

model	order details	packing unit	order code
	Rp x G
G2919	1 x 1 3/8		526 412

Union,
brass,
conical sealing,
with male thread,
for connection to
gas ball valves and gas valves,

model	order details	packing unit	order code
	R x G
G2920	1 x 1 3/8		526 474

Profipress G-Assembly unit,
with SC-Contur,
for double-pipe gas meter connector,
inlet/outlet: press connection,
angled ball valve, connection elbow and
profile angle made of brass,
both sides with Profipress G-Press connection,
both sides with integrated meter union,
with wall mounting,
lockable, leadable,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-G-test mark,

model	order details	packing unit	order code
	press connection x (VGas in m3/h)
G2343	28		535 322

with thermal shut off facility valve,

model	order details	packing unit	order code
	press connection x (VGas in m3/h)
G2343T	28		535 339

with gas excess flow valve type K,
working pressure 15 to 100 mbar,

model	order details	packing unit	order code
	press connection x (VGas in m3/h)
G2343S	28 x (2,5)		618 247
	28 x (4,0)		618 254
	28 x (6,0)		618 261

Assembly unit,
for double-pipe gas meter connector,
inlet/outlet: female thread,
angled ball valve, connecting elbow and
profile elbow made of brass,
female thread on both sides,
formed meter union on both sides,
with wall mounting,
lockable, leadable,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-G-test mark,

model	order details	packing unit	order code
	threaded connection x (VGas in m3/h)
G2343.1	1		535 308

with thermal shut off facility valve,

model	order details	packing unit	order code
	threaded connection x (VGas in m3/h)
G2343.1T	1		535 315

with gas excess flow valve type K,
pressure range 15 to 100 mbar,

model	order details	packing unit	order code
	threaded connection x (VGas in m3/h)
G2343.1S	1 x (2,5)		618 544
	1 x (4,0)		618 551
	1 x (6,0)		618 568

Profipress G-Assembly unit,
with SC-Contur,
brass,
for double-pipe gas meter connector,
inlet: ball valve made of brass
with press connection,
outlet: Profipress G-Press connection,
both sides with mounted meter union,
with wall mounting,
lockable, leadable,
ambient temperature max. 70 °C,
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-G-test mark,

model	order details	packing unit	order code
	press connection x (VGas in m3/h)
2648	28		615 260

with thermal facility shut off valve,

model	order details	packing unit	order code
	press connection x (VGas in m3/h)
2648T	28		632 755

with gas excess flow valve type K,
working pressure 15 to 100 mbar,

model	order details	packing unit	order code
	press connection x (VGas in m3/h)
2648S	28 x (2,5)		618 278
	28 x (4,0)		618 285
	28 x (6,0)		618 292

Assembly unit,
for double-pipe gas meter connector,
inlet: ball valve made of brass,
with female thread,
outlet: female thread,
mounted meter union on both sides,
with wall mounting,
lockable, leadable,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-G-test mark,

model	order details	packing unit	order code
	threaded connection x (VGas in m3/h)
G2114.1	1		528 560

with thermal shut off facility valve,

model	order details	packing unit	order code
	threaded connection x (VGas in m3/h)
G2114.1T	1		528 553

with gas excess flow valve type K,
pressure range 15 to 100 mbar,

model	order details	packing unit	order code
	threaded connection x (VGas in m3/h)
G2114.1S	1 x (2,5)		618 605
	1 x (4,0)		618 612
	1 x (6,0)		618 629

Profipress G-Assembly unit,
with SC-Contur,
for double-pipe gas meter connector,
inlet/outlet: ball valve made of brass
with press connection,
both sides with mounted meter union,
with wall mounting,
lockable, leadable,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-G-test mark,

model	order details	packing unit	order code
	press connection
G2113	28		528 577

mit Gasströmungswächter Typ K,
Druckbereich 15 bis 100 mbar,

model	order details	packing unit	order code
	d x (VGas)
G2113S	28 x (2,5)		668 389
	28 x (4,0)		668 396
	28 x (6,0)		670 153

Assembly unit,
for double-pipe gas meter connector,
inlet/outlet: ball valve made of brass,
with female thread,
mounted meter union on both sides,
with wall mounting,
lockable, leadable,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-G-test mark,

model	order details	packing unit	order code
	threaded connection
G2113.1	1		528 539

Manifold unit,
steel pipe yellow powder coated,
for double-pipe gas meter connector,
suitable for line mounting
of double-pipe gas meter connector,
with sealed in
gas meter angle ball valve made of brass,
formed meter union,
height adjustable,
with wall mounting,
female thread, left,
male thread, right,
line mounting of
multiple manifold units possible,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-G-test mark,

model	order details	packing unit	order code
	manifold connection x connection meter outlet x center distances x(VGas in m3/h)
G2342	1		532 321*
	1 1/2		532 611*
	2		532 628*
* only available from existing stock

with thermal shut off facility valve,

model	order details	packing unit	order code
	manifold connection x connection meter outlet x center distances x(VGas in m3/h)
G2342T	1		532 727*
	1 1/2		532 734*
	2		532 840*
* only available from existing stock

with gas excess flow valve type K,
pressure range 15 to 100 mbar,

model	order details	packing unit	order code
	manifold connection x connection meter outlet x center distances x(VGas in m3/h)
G2342S	1 x (2,5)		618 636
	1 x (4,0)		618 643
	1 x (6,0)		618 650
	1 1/2 x (2,5)		618 667
	1 1/2 x (4,0)		618 674
	1 1/2 x (6,0)		618 681
	2 x (2,5)		618 698
	2 x (4,0)		618 704
	2 x (6,0)		618 711

with gas excess flow valve type K,
pressure range 15 to 100 mbar,

model	order details	packing unit	order code
	threaded connection x (VGas in m3/h)
G2110.1S	1 x (2,5)		618 728
	1 x (4,0)		618 735
	1 x (6,0)		618 742

Gas meter angled ball valve,
brass,
for double-pipe gas meter connector,
for shutting off double-pipe gas meter connector,
inlet: male thread,
outlet: female thread,
lockable, leadable,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-G-test mark,

model	order details	packing unit	order code
	threaded connection x (VGas in m3/h)
G2110	3/4	5	525 125
	1	10	525 132
	1 1/4	5	525 149
	1 1/2	2	531 485
	2	2	531 492

with thermal shut off facility valve,

model	order details	packing unit	order code
	threaded connection x (VGas in m3/h)
G2110T	3/4		526 825
	1		526 832
	1 1/4		526 849

with gas excess flow valve type K,
pressure range 15 to 100 mbar,

model	order details	packing unit	order code
	threaded connection x (VGas in m3/h)
G2110S	3/4 x (2,5)		618 759
	3/4 x (4,0)		618 766
	1 x (2,5)		618 773
	1 x (4,0)		618 780
	1 x (6,0)		618 797
	1 1/4 x (6,0)		618 803
	1 1/4 x (10,0)		618 810

Elbow,
gunmetal,
for connection at the exit side
of double-pipe meter connector,
suitable for model G2110,

model	order details	packing unit	order code
	threaded connection
2614.5	1		444 792

To insure the shutting off of the gas
flow in pipes, when a specific
temperature is reached in case of fire.

Thermal shut off facility valve,
galvanized steel,
to protect components which
are not thermally stable,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-G-test mark,
inlet: female thread,
outlet: male thread,

model	order details	packing unit	order code
	threaded connection
G2206T	1/2		526 528
	3/4		526 535
	1		526 542
	1 1/4		526 955
	1 1/2		526 962
	2		526 979

inlet: female thread,
outlet: male thread,

model	order details	packing unit	order code
	Rp
G2206.1T	1 1/4		526 924*
	1 1/2		526 931*
	2		526 948*
* only available from existing stock

Flange valve
(thermal shut off facility valve),
galvanized steel,
to protect components which
are not thermally stable,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-G-test mark,

model	order details	packing unit	order code
	flange nominal width
G2208T	32		532 949*
	40		532 956*
	65		532 871*
	100		532 895*
	150		532 918*
* only available from existing stock

Profipress G-Gas appliance
ball valve,
with SC-Contur,
with thermal shut off facility valve,
brass,
straight version,
connection of heating appliances and
water heaters,
with locking shut-off valve,
inlet: press connection,
outlet: female thread,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-G test mark,

model	order details	packing unit	order code
	ball valve nominal width (threaded connection x press connection)
2646	(15) 15 x 1/2		537 180
	(15) 18 x 1/2		537 197
	(20) 22 x 3/4		537 203
	(25) 28 x 1		537 210

Gas appliance ball valve,
with thermal shut off facility valve,
brass,
straight version,
for the connection of heating appliances
and warm water heaters,
with locking shut-off valve,
inlet: female thread,
outlet: union with female thread,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-G-test mark,

model	order details	packing unit	order code
	threaded connection
G2107.1T	1/2  bright		526 108
	3/4  bright		526 122
	1  bright		526 146
	1/2  chrome plated		526 115
	3/4  chrome plated		526 139
	1  chrome plated		526 153

Gas appliance angled ball valve,
with thermal shut off facility valve,
brass,
angled,
connection of heating appliances
and water heaters,
with locking shut-off valve,
inlet: male thread,
outlet: female thread,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-G test mark,

model	order details	packing unit	order code
	threaded connection
G2109T	1/2  chrome plated		526 177
	3/4  chrome plated		526 184
	1  chrome plated		526 160

Profipress G-Concealed gas socket,
with SC-Contur,
with thermal shut off facility valve,
with Gas-Excess flow valve,
brass,
for connecting gas appliances
up to Q_{NB, max.} = 11 KW
via gas plug-in hoses with
Bayonet connection female,
inlet: press connection,
outlet: socket according to VP 635-1,
ambient temperature max. 70 °C,
max. working pressure 0,1 bar,
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	press connection x (VGas in m3/h)
2643	15 x (1,6)		586 881

Concealed gas socket,
with thermal shut-off facility valve,
with Gas-Excess flow valve,
brass,
for the connection of gas appliances
bis Q_{NB, max.} = 11 KW
via gas plug-in hoses
with Bayonet connection male,
inlet: 1/2" male thread,
outlet: socket according to VP 635-1,
ambient temperature max. 70 °C,
max. working pressure 0,1 bar,
high thermally stable, 650 °C/30 min, GT1,
with DVGW-G-test mark,

model	order details	packing unit	order code
	press connection x (VGas in m3/h)
2643.1	1/2 x (1,6)		586 898

Cover,
plastic,
suitable for Concealed-Gas socket,
model 2643 and 2643.1,

model	order details	packing unit	order code
2643.9	white		586 904
	chrome plated		616 649
	chrome plated		617 264
	chrome plated		617 257

Profipress G-Concealed gas socket,
with SC-Contur,
with thermal shut-off facility valve,
brass,
for connecting gas appliances
via plug-in hoses with Bayonet connection female,
inlet: press connection,
outlet: socket according to DIN 3383-1,
open/closed display,
frame/cover: white plastic,
ambient temperature max 70 °C,
max. working pressure 0,1 bar,
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-G-test mark,

model	order details	packing unit	order code
	press connection
G2020T	15		528 966
	15		528 959

art.-no. 528 966 with lock
art.-no. 528 959 without lock

Concealed gas socket,
with thermal shut off facility valve,
brass,
for the connection of gas appliances
via gas plug-in hoses with
Bayonet connection female,
inlet: male thread,
outlet: socket according to DIN 3383-1,
open/closed display,
frame/cover white plastic,
ambient temperature max. 70 °C,
working pressure 0,1 bar,
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-G-test mark,

model	order details	packing unit	order code
	threaded connection
G2020.1T	1/2		528 935
	1/2		528 829

Art.-Nr. 528 935 with lock
Art.-Nr. 528 829 without lock

Gas socket,
with thermal shut off facility valve,
chromium plated brass,
for connecting gas appliances
via plug-in hoses
with Bayonet connection female,
with extra shut-off facility,
inlet: male thread,
outlet: socket according to DIN 3383-1,
open/closed display,
ambient temperature max. 70 °C,
working pressure 0,1 bar,
high thermally stable,
with DIN-DVGW-G-test mark,

model	order details	packing unit	order code
	threaded connection
G2019T	1/2  chrome plated		525 767

for laboratory systems,
for the connection of gas burners
in laboratory areas,

model	order details	packing unit	order code
	threaded connection
G2019LT	1/2  chrome plated		527 389

Gas socket,
with thermal shut off facility valve,
chromium plated brass,
for connecting gas appliances
via plug-in hoses
with Bayonet connection female,
inlet: male thread,
outlet: socket according to DIN 3383-1,
open/closed display,
ambient temperature max. 70 °C,
working pressure 0,1 bar,
high thermally stable,
with DIN-DVGW-G-test mark,

model	order details	packing unit	order code
	threaded connection
G2016T	1/2  chrome plated		526 788

Gas plug-in hose,
straight version,
for connection to gas sockets
model 2643 and 2643.1,
inlet: Bayonet connection male,
outlet: female thread Rp1/2,
internal hose: corrugated hose
made of stainless steel,
external hose: plastic hose,
ambient temperature max. 70 °C,
working pressure 0,1 bar,
with DVGW-G-test mark,

model	order details	packing unit	order code
	threaded connection x nominal length
G2028	1/2 x 500		594 039
	1/2 x 750		594 046
	1/2 x 1000		595 159
	1/2 x 1250		595 166
	1/2 x 1500		595 173

Gas plug-in hose,
straight-way type,
for connecting to gas sockets
models G2016 and G2019,
inlet: Bayonet connection male,
outlet: female thread,
internal hose: stainless steel corrugated hose,
external hose: rugged agraff hose
made of stainless steel,
ambient temperature max. 70 °C,
working pressure 0,1 bar,
with DIN-DVGW-G test mark,

model	order details	packing unit	order code
	threaded connection x nominal length
G2023	1/2 x 500		531 904
	1/2 x 800		531 911
	1/2 x 1000		531 928
	1/2 x 1250		531 935
	1/2 x 1500		531 942
	1/2 x 2000		532 338
	1/2 x 2500		532 345
	1/2 x 3000		532 352

Note:
Maximum hose length in
house installations 1500 mm!

Gas plug-in hose,
angled,
for connection to gas sockets
models 2020T and G20201T,
inlet: Bayonet connection male,
outlet: female thread,
internal hose: stainless steel corrugated hose,
external hose: rugged agraff-hose,
made of stainless steel,
ambient temperature max. 70 °C,
working pressure 0,1 bar,
with DIN-DVGW-G test mark,

model	order details	packing unit	order code
	threaded connection x nominal length
G2025	1/2 x 1000		533 670
	1/2 x 1500		535 445

Special lengths on request!

Gas connection plug,
for laboratory sockets according to DIN 3383-4,
for the use of gas burners
in laboratories for use with
hoses with laboratory gas burners
according to DIN 30 664, part 1,
ambient temperature max. 70 °C,
working pressure 0,1 bar,
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-G-test mark,

model	order details	packing unit	order code
	hose nominal width
G2024L	15  chrome plated		532 932

Gas ring corrugated hose,
for connections of large ovens,
gas burners and gas water heaters,
inner hose: stainless steel corrugated hose,
external hose: stainless steel woven hose,
inlet: female thread, union,
cast iron metallic sealing,
outlet: male thread, hexagon-nipple
made of cast iron,
ambient temperature max. 300 °C,
working pressure 4 bar,
with DIN-DVGW-G-test mark,

model	order details	packing unit	order code
	threaded connection x nominal length
G2029	1/2 x 500		531 645*
	1/2 x 800		531 836*
	1/2 x 1500		531 898*
	3/4 x 1500		531 690*
	1 x 800		531 843*
	1 x 1000		531 706*
	1 1/4 x 500		531 867*
	1 1/4 x 800		532 369*
	1 1/2 x 800		531 713*
	1 1/2 x 1500		532 390*
	2 x 1500		532 314*
* only available from existing stock

Profipress G-Gas meter
connection plate,
with SC-Contur,
for double-pipe gas meter connector,
base plate and rotating elbow galvanized,
connection elbows made of brass,
inlet/outlet: press connection,
coupling sealed in and mounted at factory,
elongated holes for wall mounting,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,

model	order details	packing unit	order code
	threaded connection x press connection
G2325	22 x 1	5	533 625
	28 x 1	5	533 618

Gas meter connection plate,
for double-pipe gas meter connector,
female thread on both sides,
elongated holes for wall mounting,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
dimension 1:
base plate and rotating elbow galvanized,
connection angle made of brass galvanized,
dimensions 3/4, 11/4, 11/2 and 2:
base plate and rotating elbow galvanized,
connection angle galvanized,

model	order details	packing unit	order code
	threaded connection
G2325.1	3/42	10	531 539
	11	10	531 546
	1 1/42		531 553
	1 1/22		531 560
	22		531 577

dimension 1:
base plate and rotating elbow yellow lacquered,
connection angle made of brass bright,
dimensions 3/4, 11/4, 11/2 and 2:
base plate and rotating elbow grey lacquered,
connection angle made of all-black malleable iron,

model	order details	packing unit	order code
	threaded connection
G2325.2	3/42		531 317
	11	10	531 324
	1 1/42		531 331
	1 1/22		531 348
	22		531 355

base plate and rotating elbow galvanized,
connection angle made of brass bright,

model	order details	packing unit	order code
	threaded connection
G2325.3	1	10	533 632

Manifold unit,
steel pipe yellow powder coated,
for double-pipe gas meter connector,
inflexible,
suitable for line mounting of
double-pipe gas meter connector,
female thread, left,
male thread, right,
line installation of
multiple manifold units possible,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,

model	order details	packing unit	order code
	manifold connection x fitting connection x center distances
G2340	1 x 1 x 250		531 591
	1 1/4 x 1 x 250		531 621
	1 1/2 x 1 x 250		531 638
	1 1/2 x 1 1/2 x 280		531 607
	2 x 1 x 250		531 669
	2 x 1 1/2 x 280		531 676
	2 x 2 x 335		531 614

Profipress G-Gas meter connection plate,
with SC-Contur,
for connection of single-pipe gas meter connector,
mounting plate and galvanized rotated elbows,
connection elbows made of brass,
inlet: press connection,
coupling sealed in and mounted at factory,
outlet: female thread,
elongated holes for wall mounting,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,

model	order details	packing unit	order code
	threaded connection x press connection
G2324	22 x 1	5	533 601
	28 x 1	5	533 595

Gas meter connection plate,
for connection of single-pipe gas meter connector,
female thread on both sides,
elongated holes for wall mounting,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
base plate and rotated elbow yellow lacquered,
connection elbow made of brass bright,

model	order details	packing unit	order code
	threaded connection
G2324.1	1	10	531 881

base plate and rotating elbow galvanized,
¹⁾ connection angle made of brass matt
nickel-plating,
²⁾ connection angle made of brass bright,

model	order details	packing unit	order code
	threaded connection
G2324.2	11	10	532 024
	12	10	533 649

base plate and rotating elbow galvanized,
connection angle made of annealed cast iron galvanized,

model	order details	packing unit	order code
	threaded connection
G2324.3	1 1/2		532 925

Spare elbow,
for gas meter connecting plates
model G23251, G23252, G23253,
G23241, G23242 and G23243,

model	order details	packing unit	order code
	Rp
G2925	3/41		532 413*
	13		532 420
	12		532 475
	1 1/41		532 437*
	1 1/42		532 482*
	1 1/21		532 444*
	1 1/22		532 499*
	21		532 451*
	22		532 505*
* only available from existing stock

¹⁾ made of cast iron black,
²⁾ made of cast iron galvanized,
³⁾ made of brass bright,

Profipress G-Base plate,
galvanized steel,
for mounting of single-pipe and
double-pipe meter connector,
with place for elbows,
model 2614.4 and 2614.6,

model	order details	packing unit	order code
	width x height
2624	310 x 60		441 562

Profipress G-Base plate,
galvanized steel,
for mounting profile model 8001,
with fixing set,
for mounting of single-pipe and
double-pipe meter connector,
with place for elbows
model 2614.4 and 2614.6,

model	order details	packing unit	order code
	width x height
2624.1	290 x 45		473 723

Attention:
Mounting profile model 8001
in group T3, Eco Plus and
T4, Mono

Profipress G-Elbow,
with SC-Contur,
gunmetal, female thread,
suitable for mounting plate,
with torsion protection and
fixing set,

model	order details	packing unit	order code
	press connection x threaded connection
2614.6	22 x 3/4		475 079
	22 x 1		473 730
	28 x 1		473 747

Mounting aid,
for keeping the center distances,
for double-pipe meter connector,

model	order details	packing unit	order code
	center distances x threaded connection
2630	1		470 357

Gas meter connection union,
made of annealed cast iron,
for double-pipe gas meter connector,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW test mark,
straight connection piece,
¹⁾ yellow galvanized,
²⁾ galvanized,

model	order details	packing unit	order code
	connection/male
G2327	3/41	10	531 461
	11	10	531 478
	1 1/42		532 512
	1 1/21		532 529
	21		532 536

eccentric threaded joint with 2,5 mm shift,
yellow galvanized,

model	order details	packing unit	order code
	connection/male
G2331	1	5	532 543

Gas meter connection union,
made of annealed cast iron,
for double-pipe gas meter connector,
straight connecting piece,
inlet: male thread,
outlet: meter union,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DVGW-test mark,
with test screw 1/8",

model	order details	packing unit	order code
	connection/male
G2337	1	10	532 581

with test connecting piece,
hose connection 9 mm,
with 1 mm test opening,

model	order details	packing unit	order code
	connection/male
G2337.1	1		592 905

Gas meter control unit-
height adjustment piece,
made of annealed cast iron,
for the connection at the entry-side
of double-pipe gas meter connector,
with usage of a gas meter control unit
on the entry side,
straight connection piece,
inlet: meter union,
outlet: male thread,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	control unit nominal width x constructional length
G2930	(25) 50		528 874

HTB-Flat seal,
made of nyhalite HTB,
for gas meter connection unions,

model	order details	packing unit	order code
	connection nominal width/ gas meter
G2932	20		532 031
	25		531 287
	32		532 048
	40		532 055
	50		532 062

Test- and closing screw,
HTB-version,

model	order details	packing unit	order code
	threaded connection
G2940	1/8"		532 406

O-Ring,
for conical sealing unions,
for models 2661, G2919 and G2920,

model	order details	packing unit	order code
	outer-&durchmesser; x sealing power
G2924	19 x 2		531 805
	27 x 2		531 812
	33 x 2		531 829

Gas particle filter,
to protect the complete
gas installation against
damage from fine particles that
can be found in gas pipes,
DVGW working sheet G260,
ambient temperature -15 °C to +80 °C,
working pressure max. 1 bar,
EG-tested in accordance with
EG gas appliance installations,

model	order details	packing unit	order code
	threaded connection
G2315	1/2		531 362*
	3/4		531 379*
	1 1/4		531 393*
* only available from existing stock

Replacement filter,
exchange filter for type G2315,

model	order details	packing unit	order code
	connection size gas particle filter
G2929	1/2 + 3/4		532 253*
	1		532 260*
	1 1/4 + 1 1/2		532 659*
	2		531 782*
* only available from existing stock

Filter cover seal,
made of Perbunan,
for model G2315,

model	order details	packing unit	order code
	connection size gas particle filter
G2931	1/2 + 3/4		532 277*
	1		532 284*
	1 1/4 + 1 1/2		532 666*
	2		531 874*
* only available from existing stock

Gas meter connection piece,
made of annealed cast iron galvanized,
for the conversion of double-pipe to
single-pipe gas meter connector installations,
connections horizontal,
leadable,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	threaded connection x meter connection
G2328	1 1/4		531 430

Gas meter connection piece,
made of annealed cast iron galvanized,
for the conversion of double-pipe to
single-pipe gas meter connector installations,
connections vertical,
leadable,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	threaded connection x meter connection
G2326	1		531 515
	1 1/4		531 423

Notice:
Also applicable for the testing of
gas pipes as adapter
double-pipe gas meter connectors!

Gas meter connection piece
straight-way type A,
made of annealed cast iron galvanized,
straight version,
for single-pipe gas meter connector
installations in connection
with a gas ball valve,
leadable,
with test screw,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	threaded connection x meter connection
G2329	1 x 2		531 447
	1 x 2		531 508
	1 1/2 x 2 3/4		532 970

art.-no. 531 447 without test screw

Gas pressure regulator connection piece,
made of annealed cast iron,
straight type,
for single-pipe gas pressure regulator,
leadable,
with a test screw,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	threaded connection x control connection
G2335	1		532 192

Overflow cap,
for single-pipe gas meter connector installations,
for testing of gas lines,
leadable,
washers included,
ambient temperature max. 70°C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DVGW-test mark,
made of brass bright,
with test plug,

model	order details	packing unit	order code
	threaded connection
G2360	2		526 481

made of annealed cast iron matt nickel-plated,
¹⁾without test plug,
²⁾with test plug,

model	order details	packing unit	order code
	threaded connection
G2360.1	2 3/42		532 307*
	2 3/41		532 222

Spare seals,
for models G2360 and G23601,

model	order details	packing unit	order code
	for threaded connection
G2360.3	2		532 086
	2 3/4		532 598

Closing cap,
for gasproofed sealing of completed
and not started running gas lines,
leadable,
washers included,
ambient temperatur max. 70°C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DVGW-test mark,
made of brass bright,

model	order details	packing unit	order code
	threaded connection
G2361	2		526 498

made of cast iron,

model	order details	packing unit	order code
	threaded connection
G2361.1	2 3/4		532 239

Spare seal,
for models G2361 and G23611,

model	order details	packing unit	order code
	for threaded connection
G2361.2	2		532 093
	2 3/4		532 604

Water pressure test unit,
for the preliminary- and
principal testing of
gas pipes through the
gas meter connection,
for single- and double-pipe
gas meter connector installations DN 25
and for single-pipe gas meter connector
installations DN 40,
completely equiped case-set,
including:
model G25401,
model G25403,
model G2326,

model	order details	packing unit	order code
G2540			526 061

Gas pipe test control unit,
made of brass chromium-plating,
for the preliminary and
principal testing of gas pipes,
manometer 0 to 2,5 bar,
&durchmesser; 63 mm KL. 1,6
2 ball valves 1/8",
hose connection 9 mm,
with double connection for forcing pump
and U-Pipe,

model	order details	packing unit	order code
	threaded connection
G2540.1	2		525 859

Adapter,
made of brass chromium-plating,
for single-pipe gas meter
connector installations DN 40,

model	order details	packing unit	order code
	threaded connection
G2540.3	2 3/4		525 972

Gas meter connection piece,
made of annealed cast iron galvanized,
for the conversion of double-pipe to
single-pipe gas meter connector installations,
connections vertical,
leadable,
ambient temperature max. 70 °C,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DIN-DVGW-test mark,

model	order details	packing unit	order code
	threaded connection x meter connection
G2326	1		531 515
	1 1/4		531 423

Notice:
Also applicable for the testing of
gas pipes as adapter
double-pipe gas meter connectors!

Test cap,
made of brass/cast iron,
for testing of gas pipes
over single-pipe gas meter connector installations,
hose connection 9 mm,
for connection of a forcing pump
and/or U-Pipe,
with 1 ball valve 1/8", PN 10,
¹⁾ made of brass bright,
²⁾ made of annealed cast iron matt galvanized,

model	order details	packing unit	order code
	threaded connection
G2560	21		526 986
	2 3/42		526 993

with 2 ball valves 1/8", PN 10,
¹⁾ made of brass bright,
²⁾ made of annealed cast iron galvanized,

model	order details	packing unit	order code
	threaded connection
G2570	21		527 006*
	2 3/42		527 013*
* only available from existing stock

Twin valve,
made of brass chromium-plating,
for the testing of gas pipes over
fittings and measuring caps,
with 1/8" test screw,
with 2 ball valves 1/8",
with double connection for forcing
pump and U-Pipe,

model	order details	packing unit	order code
	threaded connection
G2550	1/8		525 996

Manometer push button valve,
made of brass chromium-plating,
1/2" female thread on both sides,
self-closing,
high thermally stable, 650 °C/30 min, GT1,
working pressure max. 4 bar (PN 4),
DVGW tested

model	order details	packing unit	order code
	threaded connection
G2590	1/2		527 365

Spare manometer,
0 to 2,5 bar, &durchmesser; 63 mm, Kl. 1,6,
applicable to model G25401,

model	order details	packing unit	order code
	&durchmesser;-mm
G2540.5	63		532 215*
* only available from existing stock

Spare seals,
for models G2540.1, G2540.3 and G2326,

model	order details	packing unit	order code
	for threaded connection
G2540.4	2		532 208
	2 3/4		532 291

Tool set,
consists of:
mounting adapter size 1 and 2,
mounting ratchet,
safety plug 3/8" to 2",
in plastic case,
with DVGW-G-test mark,
with closing cap for
single-pipe gas meter connector
ball valves DN 25,

model	order details	packing unit	order code
	for threaded connection
G2370	3/8&bindestrichlang;2		533 021

content without closing cap DN 25,

model	order details	packing unit	order code
	for threaded connection
G2370.1	3/8&bindestrichlang;2		533 328

Mounting adapter,
size 1 for safety caps and plugs
with thread sizes of 3/8" to 3/4" and
screw/nut sizes of M10 to M16,
size 2 for safety caps and plugs
with thread sizes of 1" to 2",

model	order details	packing unit	order code
	adapter size
G2370.2	1		533 045
	2		533 052

Mounting ratchet,
for mounting adapter size 1+2,

model	order details	packing unit	order code
	seat
G2370.3	1 + 2		533 069

Gas safety cap,
made of steel galvanized,
secure closing of pipe ends,
with female thread,
working pressure max. 5 bar (MOP 5),
high thermally stable, 650 °C/30 min, GT1,
with DVGW-G-test mark,

model	order details	packing unit	order code
	threaded connection
G2370.5	1/2		528 157
	3/4		528 102
	1		528 119
	1 1/4		528 164
	1 1/2		528 126
	2		528 133