T2 Steptec
T2 Steptec

Substructure »

 

Steptec-C profile,
for partial-high and room-high pre-wall
and partition wall constructions,
40 x 40 mm,
all 30 cm elongated hole continuously
pre-punched for fixing to
wall, floor or ceiling,
made of galvanized steel,

modelorder detailspacking unitorder code
 length  
84015000  4471 781

 

Steptec-Complete package,
related to the planked surface,
completely for building a partial-high or
room-high partition- or
pre-wall construction

with:
Steptec connectors made of galvanized steel,
for connection of Steptec-
C profiles in 45° - or 90° - impacts,
fixing material for wall, floor
or ceiling mounting of the Steptec-C profiles,
compensation material for uneven walls,
self tapping screws for facing tile,

modelorder detailspacking unitorder code
 sqm  
84001  114471 545
3  90471 750
5  90471 767
10  60471 774

 
 

Modules »

 

Steptec-WC-module,
for wall-hung WC,
made of steel, galvanized,

with:
Viega concealed cistern Visign 2H for
actuating panels Visign,
9 l and dual flush (full flush
ca. 9 l, 6 l / small flush ca. 3 l),
immediate reflushing is possible
when set at factory,
for front flush, corner valve,
pre-mounted water supply with
1/2 female thread,
depth adjustable WC connection elbow
DN 90 made of polypropylene,
eccentric adapter DN 90/100,
WC connection fitting,
fixing set for module and WC,
without actuating panel,

modelorder detailspacking unitorder code
 constructional height (min.)  
8461.39801  12656 119
1130 (1110)  12656 102

Attention:
1) Depending on the ceramic chosen, the
toilet seat may partially cover
the actuating panel, whilst open. In use of
Visign for More sensitive-actuating panels,
this leads to unintended release of flushing process.

Flushing pipe bow useable with ventilator
connection model 8310.26 (group T7)!

** Only with 1130 mm - constructional heigth!

Actuating panels and accessories
in group T5
 

Steptec-WC-module,
for wall-hung WC,
made of steel, galvanized,

with:
Viega concealed cistern Visign 2H for
actuating panels Visign,
9 l and dual flush (full flush
ca. 9 l, 6 l / small flush ca. 3 l),
immediate reflushing is possible
when set at factory,
for top flush,corner valve,
pre-mounted water supply with
1/2 female thread,
depth adjustable WC connection elbow
DN 90 made of polypropylene,
eccentric adapter DN 90/100,
WC connection fitting,
fixing set for module and WC,
without actuating panel,

modelorder detailspacking unitorder code
 constructional height  
8437.3840  12656 126

Attention:
Actuating panels and accessories
in group T5
 

Steptec-WC-module,
for wall-hung WC,
made of steel, galvanized,

with:
Visign 2L-concealed cistern for
Visign actuating panels,
9 l and dual flush (full flush
ca. 9 l, 6 l / small flush ca. 3 l),
immediate reflushing is possible
when set at factory,
for front flush, corner valve,
pre-mounted water supply with
1/2 female thread,
depth adjustable WC-
connection elbow DN 90 made of PP,
eccentric adapter DN 90/100,
WC connection fitting,
fixing set for module and WC,
without actuating panel,

modelorder detailspacking unitorder code
 constructional height  
8438.3840  12656 133

Note:
Depending on the WC-ceramic chosen,
the toilet seat may partially cover,
the actuating panel, whilst open.
In the case of WC-ceramic
with a size of under 500 mm, e.g.:

V & B
Viala 765310
Viala 765210

Keramag
Renova-Comprimo 204550
Joly 203060

it is possible that the seat may full shut.
In these cases it is recommended
to use top flush.

Actuating panels and accessories
in group T5
 

Steptec-Bidet-module,
for wall-hung bidet,
frame made of steel, galvanized,

with:
sound protected and
height adjustable holders for
Viega system wall bushings,
height adjustable drain elbow DN 40/50,
rubber nipple DN 40/30,
self-adhesive sealing flanges,
fixing material for module and bidet,

modelorder detailspacking unitorder code
 width  
8467.3430  656 140

 

Steptec-Built-in box-module,
for installation of electro-
flow heaters,
(e.g. Vaillant, Stiebel Eltron),
made of steel, galvanized,

with:
cover, which can be tiled,
magnetic snap,
hinges and fixing material,

modelorder detailspacking unitorder code
 height x width x depth  
8470609 x 314 x 154  495 176

 
 

Special accessories »

 

Steptec-Connector,
for the connection of Steptec-rails
in 45° - or 90° - impacts by clamping,
with thread for uncoupling of pipe clamps
or for depth adjustment of the wall
construction with commercial threaded rod,
completely pre-mounted,
made of steel, galvanized,

modelorder detailspacking unitorder code
841010471 798

 

Steptec-Fixing set,
Fixing accessories for the wall-,
floor- or ceiling fixation of
Steptec profiles,

with:
10 screws with collar,
10 dowls and
compensation material,

modelorder detailspacking unitorder code
8409M8 x 70  611 347

 

Steptec-Wall elbow,
for wall connection of
pre-fabricated Steptec-walls,

modelorder detailspacking unitorder code
841550 x 75  5485 061

 

Steptec-Articulation,
for the continuous angular adjustment
from 0° to 180°, usable for fixing
of rails to roof slopes,
made of steel, galvanized,

modelorder detailspacking unitorder code
841110471 804

 
 

Tools »

 

Steptec-Profiles punching machine,
for shortening and punching the
Steptec-C profiles without burrs,
made of steel, powder coated,
in case,

modelorder detailspacking unitorder code
8420471 866

 

Steptec-Spare blade,
for shortening the Steptec-C profiles,
for Steptec-C profile punching machine,

modelorder detailspacking unitorder code
8420.1471 880

 

Steptec-Spare blade,
for punching the Steptec-C profiles,
for Steptec-C profile punching machine,

modelorder detailspacking unitorder code
8420.2471 897