Viega backflow traps
For waste water containing faecal matter and without faecal matter, tested in acc. with DIN EN 13564, quality-controlled
Backflow traps in acc. with DINEN 13564 for use in pipes carrying waste water containing faecal matter.
Backflow traps in acc. with DIN EN 13564 for use in pipes carrying waste water not containing faecal matter.
Backflow prevention in the form of an odour trap.
Backflow trap in the form of a floor drain.
Simple backflow traps for practical problem solutions as well as cleaning pipes round off the program.
Environmentally friendly PP (polypropylene). This high-quality material ensures the best suitability for domestic waste water.Intended use for backflow traps
According to EN 12056‑4 and DIN 1986‑100, drainage points beneath the backflow level should be secured against backflow from the sewer in acc. with EN 13564‑1.
If there are unsecured drainage points below the backflow level, cellar flooding can lead to damage to property, contamination and the risk of disease. The deciding factor as to what is above or below the backflow level is normal water level in the odour trap.
Drainage points above the backflow level are not in danger of backflow. Drainage equipment should only be below the backflow level when it is absolutely necessary.
The requirements on the backflow prevention are described in the standards DINEN 13564‑1 and DINEN 1986‑3.
Maintenance should be carried out twice a year, inspections once a month.
All Viega backflow traps are quality-controlled in acc. with DIN EN 13564.
The choice of product is determined by the type of water, which flows through the backflow prevention in the direction of the sewer.One differentiates between:
Instruction for use
- waste water free from faecal matter - e.g. from showers or washing machines (grey water). All Viega backflow traps are suitable for use in grey water.
- waste water containing faeces - e.g. from urinals and toilets (black water). Viega offers Grundfix Plus Control for use with black water.
The materials used are suitable for loads typical for domestic use. This leads to the following limitations:
Viega balcony and terrace drains
- only typical household water with a short-term max. temperature of 95 °C may be disposed of via the odour traps
- no chemical cleaning agents may be used to remove blockages in pipes
- the cleaning of surfaces may only be carried out using mild cleaning agents
The balcony and terrace drains are intended for use on balconies, terraces and non-heat-insulated small roof areas.
- balcony and terrace drains, 100 mm
- tested in acc. with DIN EN 1253, quality controlled
- environmentally friendly PP (polypropylene)
- the above mentioned drainage capacities correspond to an accumulation height of 20 mm above the grate (in acc. with DINEN 1253)
Viptool planning software
- System dimension 100 mm
- Drainage capacity max. 1.1 l/s
- Nominal width DN50 or DN70
- Grate size 94x94 mm
- Grate made of stainless steel, material No. 1.4301
- Sealing flange for holding the sealing lane/bonded sealing technology
The software Viptool assistant supports you with the choice and configuration of the individual products from the Advantix floor drainage range. An assistant automatically determines the floor drain, including sealing flange, height adjustment piece, top and all other accessories. In addition to a piece list, a drawing with all of the details from the program can be printed out. The free software Viptool assistant as well as other information can be found at: viega.com