Revert Revert

Drains for bathtubs and shower trays

General

Supplies, drains and overflows made of polypropylene (PP) and accessories for bathtubs and shower trays. Various mechanical and electronic equipment versions.

Multiplex Trio E
Electronically controlled mixing unit for filling a bathtub. For use with drain and overflow fittings with water inlet.

  • Show more
    Multiplex Trio
    Drain and overflow for bathtubs, with water inlet through the overflow unit, drain hole Ø 52 mm, for use with pipe interrupter, rotatable rosette or motor-​operated.

    Rotaplex Trio
    Drain and overflow for bathtubs, with water inlet through the overflow unit, drain hole Ø 90 mm, for use with pipe interrupter, rotatable rosette or motor-​operated.

    Multiplex Trio F
    Drain and overflow for bathtubs, with water inlet through the drain unit, drain hole Ø 52 mm, for use with pipe interrupter, rotatable rosette or motor-​operated.

    Rotaplex Trio F
    Drain and overflow for bathtubs, with water inlet through the drain unit, drain hole Ø 90 mm, for use with pipe interrupter, rotatable rosette or motor-​operated.

    Multiplex
    Drain and overflow for bathtubs, drain hole Ø 52 mm, rotatable rosette operation.

    Rotaplex
    Drain and overflow for bathtubs, drain hole Ø 90 mm, rotatable rosette operation.

    Citaplex
    Drain and overflow for bathtubs, drain hole Ø 52 mm, closure with valve plug.

    Domoplex
    Drain for shower trays, drain hole Ø 52 mm, with removable odour trap.

    Tempoplex
    Drain for shower trays, drain hole Ø 90 mm, installation depth 60 or 80 mm, with removable odour trap.

    Tempoplex Plus
    Drain for shower trays, drain hole Ø 90 mm, installation depth 90 mm, with especially high drainage capacity, with removable odour trap.

    Duoplex
    Drain for shower trays, drain hole Ø 52 mm, with cover plate standpipe, with removable odour trap.

    Varioplex
    Drain for shower trays, drain hole Ø 52 mm, with standpipe.

    Note
    Use of the products for areas of application and media other than those described must be agreed in consultation with Viega! Plastic products made from PP (polypropylene) are environmentally compatible and offer the best properties for domestic waste water. Hot water heated only briefly to max. 95 °C may be discharged via the odour traps! Do not use chemical cleaning agents to remove pipe blockages! Use only mild cleaning agents for the surfaces! Detailed information about applications, restrictions and national standards and directives can be found in the product information, either printed or on the Viega website.

    Subject to change without prior notice!
    Latest Z- and installation dimensions as well as further technical information can be found on the Viega website and have to be checked before purchase, planning, construction work and use. Our products are continuously optimised.

    This product description contains important information on choice of product and system, mounting, commissioning as well as intended use and, if required, on maintenance measures. This information on products, their features and application techniques is based on currently valid standards in Europe (e.g. EN) and/or in Germany (e.g. DIN/DVGW). Some passages in the text may refer to technical regulations in Europe/Germany. These should be considered as recommendations for other countries where no corresponding national requirements exist. The relevant national laws, standards, regulations, directives and other technical provisions take priority over the German/European directives specified in this product description: The information herein is not binding for other countries and regions and should be understood as recommendation.

Our website uses cookies to help you to get the best out of its content, to improve your experience and to collect statistical data. We do not use cookies to create user profiles. Please refer to our Data protection statement for more information.